21A675B766 Troy-Bilt Tiller - Overview
Sections of the 21A675B766
[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part ...
$6.40
In Stock
Wsh, Bell., .34 x .872 x .06
PartSelect #: PS9118681
Manufacturer #: 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou...
$6.74
In Stock
Tiller Wheel Shaft Oil Seal
PartSelect #: PS10027983
Manufacturer #: 921-04031
This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and ...
$17.17
In Stock
Washer-lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$6.57
In Stock
SEAL-OIL
PartSelect #: PS19301951
Manufacturer #: 921-04035
This is a genuine OEM sourced item that is specially produced for Troy-Bilt and MTD roto-tillers. The purpose of this component is to provide a tight seal which will prevent oil from leaking. It is an...
$16.77
On Order
PULLEY-IDLER
PartSelect #: PS19285514
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
$50.96
On Order
WASHER-KEY HANDLE
PartSelect #: PS19273165
Manufacturer #: 736-04445
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD lawn and garden equipment. This is a special component that is utilized to provid...
$6.40
Special Order
KNOB-CONTROL
PartSelect #: PS19321467
Manufacturer #: GW-9119
This is an authentic Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with tillers. The knob attaches to the end of the depth regulator bar and is used to pro...
$18.30
Special Order
Hexagonal L-Nut
PartSelect #: PS9164517
Manufacturer #: 912-0158
This is a genuine item that is supplied by the original equipment manufacturer for use with MTD and Ryobi lawn and garden equipment. It is a standard hardware which has multiple applications, please m...
$6.40
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
-
Norman from RAINIER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set, Wrench set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!