21A-24MB752 (2016) Yard Machines Tiller - Overview

This is a genuine manufacturer-sourced part which is designed for use with Bolens, Yard Machines, and MTD tillers. The clutch cable engages the tines. It is an identical replacement for a faulty or a missing cable that was installed on a new unit. Please make sure to check the appropriate diagrams for your model for the correct repair pro...Read morecedure of this part. Keep in mind this high-quality rubber insulated clutch cable is sold individually. You may need a screwdriver and pliers to replace this component.

The tine shaft oil seal is used in tillers and is made of metal and rubber. This part is priced as an individual item, but may require two for proper installation. If the seal becomes dried out or cracked it will need to be replaced. It presses onto the sides of the transmission housing and stops oil from leaking, and may require a screwdriver during replacement. This part is an OEM from Troy-Bilt.

The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.

This item is available as an individual replacement part. The v-belt goes around the idler pulley and the flywheel pulley. During replacement, it may require a socket set and a wrench set to help install this part correctly. It is made out of a durable material and will require replacing if it breaks or stretches. This genuine item is sup...Read moreplied by the original equipment manufacturer for use with tillers made by Bolens, MTD, and Yard Machines.

This OEM Cone Bearing, also known as a Tapered Bearing, is a silver, .75 I.D., metal part. Sold individually, it attaches inside the wheel hub, and customers have rated the installation as Medium Difficulty. It is recommended to pack the bearing before installation. This part reduces friction on a moving part, inside of a stationary par...Read moret. When it breaks, you will hear a grinding, growling or squealing sound. It must be replaced when worn or damaged (such as if there are scores on the rollers or on the mandrel).

This is an original MTD replacement part. The extension spring is designed by the manufacturer for use in lawn tractors and tillers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different springs used in the machine. Refer to the parts diagram to b...Read moree sure of ordering the correct part. You may require a wrench and pliers when replacing this item. This part is sold individually.