21811 Toro Lawn Mower - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

This is a Genuine OEM replacement part used on a variety of Lawn Mowers. This item is made out of Metal and it is Sold Individually. If either the ball bearing or the bearing retainer wear out this will cause the wheels have trouble turning. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the lo...Read moread and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This snap ring fits into a groove to hold a pinion gear or other drive part in place. A loose drive part may mean the ring is bent, weak, or missing. Check the groove, washers, bearings, and shaft for damage before replacing it. Confirm fit with the full machine model, serial range, and parts diagram. Turn off the equipment and disconnect...Read more the battery or spark plug lead when needed. Wear eye protection and use retaining-ring pliers. Make sure the new ring sits fully and evenly in the groove before use.

This item has been OEM sourced an is intended to be used with walk-behind lawnmowers from Toro and Lawn Boy. The metal pinion gear attaches the mower\\\'s transaxle and is used to interconnect with the wheel\\\'s gear to rotate the drive wheel. This item is available as an individual replacement part.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal screw is used to secure the mower's blade to the drive shaft. This item may require a hex socket wrench to install and the bolt is sold individually.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the control cable out of the way by securing it in the middle of the handle. This item is priced as a single part.

This lower handle is designed to provide a secure and comfortable grip while operating your equipment, helping maintain proper control and balance during use. Built for durability and reliable performance, it supports the overall structure by withstanding regular handling and operational stress. Ideal for replacing a worn or damaged handl...Read moree, it helps restore stability and ease of use for a smoother, more dependable experience.

This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.

This genuine manufacturer-sourced part is specially designed for Toro and Lawn Boy lawn and garden equipment. It is an important component which provides a tight seal between connected parts. If the washer is worn, damaged or missing, this will provide an identical replacement for the original part that was installed on a new unit. To ens...Read moreure the correct repair procedure, check the diagrams for your model. Note, this high-quality washer is made of durable material and is sold individually.

This is an original manufacturer-sourced replacement part which is made for use with Toro lawn mowers. It is the lower drive belt that connects the engine crankshaft pulley to the transmission pulley. Over time it may wear out and stretch eventually requiring a replacement. Make sure to clean the pulleys before installing the new belt to ...Read moreensure top performance and longevity with the new belt. One durable rubber traction v-belt is included. Note, the upper belt is sold separately. Refer to the appropriate diagrams of your model for the correct installation of the new component.