218-406-06295220 (1988) MTD Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber. This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. Y...Read moreou will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out. Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.

This clutch control cable is an OEM part made to be used with your garden tiller. Its function is to engage the clutch in order to drive the tiller. This part is black and silver in color, composed of metal with a rubberized coating, and it is sold individually. Over time, this part can snap or break due to regular use, and when this occu...Read morers, the clutch will not function properly when applied, meaning you will no longer be able to control the drive of your tiller. Replacing this part is easy, however, and only requires a pair of pliers.

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

This is a genuine manufacturer-sourced replacement throttle cable which is specially designed for use with MTD tillers. It is connected to the carburetor and it stops the engine when you shift the lever to the full choke position, over time it may wear out and break eventually requiring a replacement. This high-quality metal throttle cabl...Read moree is sold individually, please note the housing, the trigger, and the hardware are all sold separately.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

The Throttle Control Box is an assembly containing the housing, trigger and hardware. It is black, plastic, rated as easy to install and requires a socket or wrench set. This kit controls the speed of the engine, and if broken you will lose control of the engine. If broken, the part should be replaced.

This part is an OEM from MTD for use with Tillers. The forward drive control cable engages the transmission to propel the tiller forward and rotate the tines when the bail arm is pulled toward the handle. The most common reason for replacing the forward drive control cable is if there is no drive, the drive is slipping or there is a Burni...Read moreng smell. This part is sold individually. The tools that you will need to replace the forward drive control cable are pliers and a screwdriver.

This screw is a high quality hardware that is specially manufactured for use on MTD and Yard Machines lawn and garden equipment. It is an authentic part that has multiple uses depending on the equipment. Make sure to check appropriate diagrams for correct location and applications of this screw. Please note, one hex head screw is included per order that will require a wrench to install or remove it.

This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.