21641 Murray Lawn Mower - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is an authentic replacement part manufactured for use with Murray walk-behind lawnmowers. This special bracket is used to link the stop cable to the stop lever. This bracket is sold as an individual replacement part, please see model diagram for associative parts.

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This high quality OEM supplied replacement part is used on Murray lawn mowers. It is generally used to secure the mulch cover. This part durable metal windnut is sold individually, please note the bolt and washer to helps securing the cover are all sold separately.

This Washer (.40.81 16g Flt) is a black, metal part, requiring a socket set to install. Installation is rated as "Easy". This washer can be used to provide a tight fit between connected components. It attaches onto the bell crank between the adjusting nut and cotter pin. Refer to your make, model and diagrams to check if this model is right for you.

This replacement screw is supplied directly from the original equipment manufacturer for use with Murray walk-behind lawn mowers. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this part. This is a high-quality co...Read moremponent which is made of durable metal and it is sold individually, the washer is included.

This is an authentic replacement part, sourced from the original manufacturer for use with walk-behind lawnmowers. The deflector connects to the rear of the mower\\\'s deck and is used to smooth over the grass clippings trailings. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

Authentic OEM approved replacement item commonly used on Murray walk behind lawn mowers. The purpose of this special bolt is to secure upper and lower mower handles together. The square area under bolts head allows it to stay secure while the lock nut/knob is being tightened. This metal bolt is sold individually.

This is the special bolt-hex which is utilized to secure the mower blade. It is an identical replacement for the hardware that was installed on a new equipment. Check the owner\'s manual and the parts diagrams for your specific model to ensure the correct replacement procedure. This high-quality bolt-hex is made of durable metal and is so...Read moreld as an individual item. It is supplied by the original manufacturer for Murray and Snapper lawn mowers. Note, a wrench will be needed to secure or remove it.

This is a genuine replacement part sourced directly from the manufacturer. The stop lever is commonly found on Murray lawn mowers. This part is made of metal, and is used to indicate the presence of a user, allowing the engine to run. You may require a screwdriver when replacing this part. This item is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with lawn tractors, snowthrowers, utility carts, and grass baggers. The special nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. This nut is available as an individual replacement part.