Models > 2150PR

2150PR Poulan Chainsaw - Overview

Sections of the 2150PR

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Fuel Line – Part Number: 530069247
Fuel Line
★★★★★
★★★★★
(4)
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$6.36
  In Stock
Tank Purge Line – Part Number: 530069216
Tank Purge Line
★★★★★
★★★★★
(2)
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$6.36
  In Stock
Primer Bulb Kit – Part Number: 530071835
Primer Bulb Kit
★★★★★
★★★★★
(1)
PartSelect #: PS9472698
Manufacturer #: 530071835
$8.91
  In Stock
Fuel Line Fitting – Part Number: 530023877
Fuel Line Fitting
★★★★★
★★★★★
(1)
PartSelect #: PS9469715
Manufacturer #: 530023877
The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "E...
$5.09
  In Stock
Fuel Cap Assembly – Part Number: 580940901
Fuel Cap Assembly
PartSelect #: PS9982262
Manufacturer #: 580940901
This part is the replacement fuel cap assembly for your chainsaw. It is made of black plastic and is sold individually. The fuel cap prevents fuel from spilling out of the chainsaw and prevents debris...
$6.36
  In Stock
Foam-Air Filter – Part Number: 530037793
Foam-Air Filter
PartSelect #: PS9470926
Manufacturer #: 530037793
$5.09
  In Stock
Nut - Bar Mounting – Part Number: 530015917
Nut - Bar Mounting
PartSelect #: PS9469166
Manufacturer #: 530015917
The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.
$3.81
  In Stock
Kit - Bar Adjust – Part Number: 530069611
Kit - Bar Adjust
PartSelect #: PS9472355
Manufacturer #: 530069611
This Chain Bar Adjuster kit is a kit which contains all necessary hardware for adjusting a chain bar on a chain saw. Installation is rated as "Easy" and requires a screwdriver, wrench set and socket s...
$5.09
  In Stock
Carb Gasket/Diaphragm – Part Number: 530069844
Carb Gasket/Diaphragm
★★★★★
★★★★★
(1)
PartSelect #: PS9472427
Manufacturer #: 530069844
Note: The beige piece pictured has been redesigned. It no longer has the four corner holes. It now only has 2 corner holes at a diagonal.
$19.12
  In Stock
Chain Catcher – Part Number: 530029850
Chain Catcher
PartSelect #: PS9470419
Manufacturer #: 530029850
$6.36
  In Stock
Pin - Bar Adjust – Part Number: 530015826
Pin - Bar Adjust
PartSelect #: PS9469135
Manufacturer #: 530015826
This Bar Pin Adjuster is an OEM part used to adjust the tension on the bar, which loosens or tightens the chain. It attaches to the slot in the bar, and the chainsaw bar adjusting screw. Installation ...
$5.09
  In Stock
Screw – Part Number: 530016153
Screw
PartSelect #: PS9469252
Manufacturer #: 530016153
$6.36
  In Stock

Questions And Answers for 2150PR

Be the first to ask our experts a question about this model!

Common Symptoms of the 2150PR

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fuel line size - Important
Be sure the fuel line is the exact same size (id and od) as the one you are replacing. I had purchased a Fuel line from my local dealer - and after a few hours I figured out that it was the wrong size! He simply cut some line from a spool he had. Didn't bother to look it up! The line from this site was perfect! The id is important because the line has to Compress to go through the hole.
Parts Used:
Fuel Line Tank Purge Line Fuel Line Fitting
  • Lawrence from ORION, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken piston ring and tune up
Straight forward, trick for the piston ring was to cut a soda can to make a sleeve that could be wrapped around the piston ring. A bit of duct tape with a tab held it shut until the piston was in position then it was easily removed as the piston was slid in.
Parts Used:
Ring - Piston Fuel Line Tank Purge Line Foam-Air Filter
  • Wade from HENDERSONVLLE, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke the original ring
Took chainsaw apart and replaced the ring.
Parts Used:
Ring - Piston
  • Danny from STEVENSON, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!