2129B Frigidaire Range Parts & Repair Help | PartSelect
Models > 2129B

2129B Frigidaire Range - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(41)
PartSelect #:PS470129
Manufacturer #:5303935066
This is a flat style oven igniter used to light the oven burner in a gas range. When the element in this igniter glows white hot, the gas is released from the safety valves, which ...
$48.64
In Stock
(9)
PartSelect #:PS12751166
Manufacturer #:316538904
Clear, 120 Volt, 40 Watt.
$12.19
In Stock
(3)
PartSelect #:PS1151517
Manufacturer #:318348800
$56.80
In Stock
(4)
PartSelect #:PS439060
Manufacturer #:316116400
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to rem...
$37.26
In Stock
(1)
PartSelect #:PS1151518
Manufacturer #:318348801
This hinge is located on left side of the oven door.
$58.55
In Stock
PartSelect #:PS468140
Manufacturer #:5303912606
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$73.01
In Stock
PartSelect #:PS453400
Manufacturer #:5303013272
$12.30
Special Order
PartSelect #:PS454072
Manufacturer #:5303131080
No Longer Available
PartSelect #:PS473692
Manufacturer #:5308009419
Comes with gas line adaptor and orifice. This part make sure that no gas is released until the igniter gets enough power to ignite the gas range.
$186.98
Special Order
PartSelect #:PS473609
Manufacturer #:5308007974
***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
$193.81
In Stock
Questions and Answers for 2129B
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven quit heating.

  • Customer: John from Darlington, SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 553 of 600 people found this instruction helpful
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as ... read more

Oven was difficult to light, then stopped lighting altogether

  • Customer: Ritchie from Ithaca, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 275 of 356 people found this instruction helpful
1. Turned off circuit breaker to stove
2. Removed the two screws holding down the floor of the oven (screws are at back.), and then lifted it out.
3. Removed the nut holding down the flame guard, and lifted it off.
4. Opened the bottom drawer.
5. Removed the protective cover in the back left of the oven at the bottom, first removing the ... read more

Oven Would Not Heat - Oven Ignitor Failure

  • Customer: Peter from Fife Lake, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 148 of 219 people found this instruction helpful
I first looked up my Model Number on PartSelect.com and looked at the schematic as well as Trouble Shooted my problem.

Reading the posts by others how they Removed, Replaced, and Repaired their Oven Ignitors, I used their helpful info, and of course did mine.

1. Unplugged my Oven/Stove.

2. Removed bottom storage door to ge... read more