Models > 20964

20964 ((400000000-999999999)) Toro Lawn Mower - Overview

Sections of the 20964

[Viewing 6 of 6]

Exact Part matches for your search term

[Viewing 1 of 1]
Wheel – Part Number: 20964
Wheel
This part number matches the current model number 20964
PartSelect #: PS12426669
Manufacturer #: 20964
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Washer-Stepped – Part Number: 614426
Washer-Stepped
★★★★★
★★★★★
(1)
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$2.99
  In Stock
Order within the next 6 hrs and your part ships today!
Chute-Discharge, Side – Part Number: 115-8447
Chute-Discharge, Side
★★★★★
★★★★★
(1)
PartSelect #: PS8847392
Manufacturer #: 115-8447
$15.79
  In Stock
Order within the next 6 hrs and your part ships today!
Screw-Taptite – Part Number: 95-1726
Screw-Taptite
★★★★★
★★★★★
(1)
PartSelect #: PS9180925
Manufacturer #: 95-1726
$2.99
  In Stock
Order within the next 6 hrs and your part ships today!
Bearing-Ball – Part Number: 104-8699
Bearing-Ball
PartSelect #: PS8824569
Manufacturer #: 104-8699
$3.79
  In Stock
Order within the next 6 hrs and your part ships today!
Bolt-Shoulder – Part Number: 614650
Bolt-Shoulder
PartSelect #: PS9046634
Manufacturer #: 614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket...
$4.56
  In Stock
Order within the next 6 hrs and your part ships today!
Nut-Lock, Ni – Part Number: 3296-29
Nut-Lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$2.99
  In Stock
Order within the next 6 hrs and your part ships today!
Screw-Hwh – Part Number: 46-8091
Screw-Hwh
PartSelect #: PS8974798
Manufacturer #: 46-8091
$3.64
  In Stock
Order within the next 6 hrs and your part ships today!
Deflector-Side – Part Number: 115-8449
Deflector-Side
★★★★★
★★★★★
(1)
PartSelect #: PS8845543
Manufacturer #: 115-8449
$8.68
  In Stock
Order within the next 6 hrs and your part ships today!
Belt-V – Part Number: 115-4669
Belt-V
PartSelect #: PS8844898
Manufacturer #: 115-4669
Wheel drive belt. Width: 3/8 inch Length: 33 1/4 inch $15.92
$25.37
  In Stock
Order within the next 6 hrs and your part ships today!
Bushing-Sleeve – Part Number: 108-9782
Bushing-Sleeve
PartSelect #: PS8833696
Manufacturer #: 108-9782
$3.27
  In Stock
Order within the next 6 hrs and your part ships today!
Retainer-Bushing, Hoc – Part Number: 108-9779
Retainer-Bushing, Hoc
PartSelect #: PS8832093
Manufacturer #: 108-9779
$12.69
  In Stock
Order within the next 6 hrs and your part ships today!
Gear-Pinion, 15T – Part Number: 131-5399
Gear-Pinion, 15T
PartSelect #: PS11804780
Manufacturer #: 131-5399
$3.76
  In Stock
Order within the next 6 hrs and your part ships today!

Questions And Answers for 20964

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Parts Used:
Arm-Spring
  • Ray from YARDLEY, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench set
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!