2094 (1991-06) Jonsered Chainsaw - Overview

Designed for use in various chainsaws, the E-Ring secures the pivot pin, which holds the handguard. It is an authentic OEM replacement part made of durable black metal and sold individually, not as part of a kit or assembly. When this part malfunctions, you may notice the handle or handguard is loose. At which point, it will need to be ...Read morereplaced. To complete this repair, you will need a pair of pliers. Customers rate this repair as Easy.

This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article an...Read mored video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This authentic OEM rim sprocket in your chainsaw transfers power from the engine to the cutting chain. It is typically located at the center of the clutch drum, situated at the end of the engine crankshaft. By engaging with the chain drive links, it enables the chain to rotate and cut through materials as the engine turns. You will notice...Read more that if the rim sprocket is broken that the chain slips, does not engage, or rotates unevenly. It may also reveal signs of wear such as worn-out teeth. Failure to replace a broken rim sprocket can result in reduced cutting power, chain damage, and increased strain on the engine. To remove the rim sprocket, first, loosen the chain tension by adjusting the tensioning screw or knob. Then, remove the guide bar by loosening the nuts or clips on the side cover and sliding the guide bar off the saw. Use a screwdriver or appropriate tool to remove the screws or fasteners securing the clutch cover. With the clutch cover removed, you can access the clutch drum. Hold the drum in place and turn the retaining bolt counterclockwise to loosen it. Carefully slide off the clutch drum. This replacement part is sold individually.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 threa...Read mored and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.

This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap y...Read moreour spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install this component.

This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. Th...Read moree coil spring has a sharp end that pierces the insulation of the ignition module\'s wire, and it is the coil spring that makes contact to the wire. This spark plug connection kit is sold individually.

It is an authentic OEM sourced item which is specifically produced for use with Husqvarna and Jonsered chainsaws. The spring fits onto the knee joint and is made of metal. During installation, a wrench set, a screwdriver, and a set of pliers may all be needed to help replace this part. It will need to be replaced if it becomes broken or stretched. Keep in mind that this part is sold individually.

This screw is an authentic high quality item that is specially produced for use on Husqvarna power equipment. It is a standard hardware which has multiple uses depending on the unit, please refer to appropriate diagrams for correct location and use of this screw. Note that one hex socket head screw is included per order, you will need a hex key also known as an allen wrench to secure or remove this item.

This is a genuine manufacturer-sourced replacement part which is specially designed for Husqvarna, Poulan and Jonsered chainsaws. The purpose of this spring is to apply tension on the connected components. If the hardware is worn or damaged, this will provide an identical replacement for the original component that was installed on a new ...Read moreunit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct repair procedure. A screwdriver will be needed to remove and resecure the hardware when replacing this spring.

This is an authentic OEM part. The Husqvarna chain catcher is compatible with many chainsaws. The metal component is a safety feature, providing protection from a damaged or broken chain. The chain catcher is fastened to the crankcase assembly. Please note the screw used to secure it is sold separately. The chain catcher is sold individually. A hex key is often required for the installation.

It is an authentic OEM part that is specially made for use with Husqvarna, Poulan, and Jonsered chainsaws. This is an identical replacement for a faulty or a missing pawl that was installed on a new unit. It is a special hardware which helps to engage the flywheel. This high-quality pawl is made of durable metal and is sold as an individu...Read moreal item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench set will be needed to perform this repair.

This part is an OEM from Husqvarna. The metal spring is made for use with several chainsaws. This item helps to secure the pawl to the flywheel, and is sold individually. A hex key and a pair of pliers are often necessary for the installation.