2090R Ryobi Trimmer - Overview

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It\\\'s used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-rin...Read moreg, use care to ensure that the right one is being used in the right spot. This ring is sold individually.

This is a genuine OEM replacement part. it is sold individually. The Bump Head Knob Assembly is the part of the trimmer that you bump on the ground to advance the cutting line from the spool. Because of the abuse this part gets, it is advisable to order an extra one so you have on on hand. LEFT HAND THREADED

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.

Is your dishwasher door not staying shut? That's frustrating! The 2 Door Latch could be just the fix you need. It's a small yet highly important part that makes sure your dishwasher door stays tightly closed while your machine 2ts to work on your dishes. Placed at the top of your door, it's the hero behind the scenes, ensuring perfect eff...Read moreiciency every time. But why is it so crucial? Well, without a properly latching door, your once trustworthy dishwasher can ineffective or even unsafe. With the 2 Door Latch, you can return your machine back to its former glory, working smoothly like brand new. The good news? You don't need to call a professional! Installation is so straightforward, you can do it yourself. Just remember to switch off your power supply first, as safety always comes first. In addition, it might be wise to wear work gloves to protect your hands. So, take the worry out of dishwashing. With the 2 Door Latch, it?s super easy to 2t your dishwasher running perfectly again. Trust us, your dishwasher will thank you.

This replacement part is a genuine high quality OEM primer bulb. It is specially produced for use on gas powered string trimmers. The purpose of the primer bulb is to force fuel from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be sent back into the tank. Over time these flexible rubber part...Read mores tend to deteriorate and lose their elasticity. If the part is cracked it will need to be replaced. Please note, one primer bulb is included per order.

This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman trimmers. The trigger allows you to control engine speed, which in turn permits you to safely control the speed of the trimmer line. This part is made of plastic and is sold individually. For installation, you will need a screwdriver and a pair of needle nose pliers to aid you.

This is a genuine manufacturer sourced replacement part designed for use with handheld lawn and garden equipment. It is utilized to create an air-tight seal between the carburetor and the insulator. Over time seals tend to become brittle and compressed eventually requiring replacement. This part is made from durable composite material and it is sold individually.

This is an original replacement part manufactured for use with trimmers. This coated steel blade is used to get more use out of trimmers. The strong blade is used to cut tall grass and brush when clearing an area. The blade is sold individually.

This shoulder strap is an authentic manufacturer-sourced part that is designed for use in a variety of lawn and garden equipment. It is an adjustable strap made of durable synthetic material that is worn over the shoulder. The strap features one plastic slide adjuster and one metal clasp that secures it to the equipment. It is designed to...Read more reduce strain on the arms, shoulders and back when using the equipment over a long period. It also stabilizes the equipment for easier handling. Over time the strap can wear down, or the clasp and adjuster may break, leading to discomfort and strain. Detach the old strap from the equipment and clasp the new strap onto the attachment points. Adjust the length using the plastic adjuster until the strap sits comfortably on your shoulder.

This is an authentic part which is sourced from original equipment manufacturer. It is generally used on handheld trimmers/edgers. This nut is designed to secure cutting blade to the trimmer shaft. Please note you would need a properly sized wrench when installing/removing this nut. Includes one (1) nut per order.

The spring fits between the outer spool & eyelet assembly and the inner reel. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers made by Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet. A screwdriver might be necessary when replacing this part if it becomes broken or bent. This part is made out of metal and is available individually.