20830 Toro Lawn Mower - Overview

This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should be replaced. Installation is rated as "Medium" difficulty by customers, and will require a screwdriver, wrenchset and seal puller. Refer to ...Read moreyour make, model and diagrams to ensure you've chosen the correct part. This model comes in black and grey.

The O-Ring is a black rubber part, used to provide a seal between two pieces. It can be used in various locations on a variety of equipment. Installation is rate as "Easy" and will require a screw driver, pliers, socket set, and wrench set. If broken, damaged, or worn due to fatigue, you will have a leak and the part must be replaced. Refer to your make, model and diagrams to see if this is the right part for you.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The special retainer is commonly used as spacing between the head of the valve and the valve spring. The retainer is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.

It is an authentic manufacturer-sourced component which is specially designed for use with Toro snowblowers. This replacement flat washer has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and use of this hardware. It is a high-quality part is made of durable metal and is sold individually.

This is sold as a kit that contains the bushing and the seal. These are genuine replacement parts sourced from the original manufacturer for use with engines, snowthrowers, lawn mowers, and blower-vacuums made by Briggs & Stratton and Toro. When replacing these items a set of pliers might be required during the installation process. They are made of metal and plastic and will require replacing if they become broken.

This is an authentic OEM sourced replacement part, it is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to appropriate diagrams for the correct and use of this item. T...Read morehis Torx screw is made of high-quality metal and it is sold individually, it includes one washer.