2077 (2001-10) Jonsered Chainsaw - Overview

This fuel hose is a genuine OEM part designed to deliver fuel from your fuel tank to the carburetor. Also known as the fuel line, it is black in color, made of rubber, sold individually, and can be attached to your machine on the fuel tank and the carb. Over time, it is possible the line breaks due to wear or drying out. If you notice c...Read moreracks or leaking fuel, it is time to replace the fuel hose. This is an easy repair according to most of our customers, and does not require any special tools.

This is a genuine manufacturer approved replacement part designed for use with chainsaws. It is used to secure starter housing to the unit. This is a metal phillips head screw which is sold individually.

This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article an...Read mored video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This authentic OEM rim sprocket in your chainsaw transfers power from the engine to the cutting chain. It is typically located at the center of the clutch drum, situated at the end of the engine crankshaft. By engaging with the chain drive links, it enables the chain to rotate and cut through materials as the engine turns. You will notice...Read more that if the rim sprocket is broken that the chain slips, does not engage, or rotates unevenly. It may also reveal signs of wear such as worn-out teeth. Failure to replace a broken rim sprocket can result in reduced cutting power, chain damage, and increased strain on the engine. To remove the rim sprocket, first, loosen the chain tension by adjusting the tensioning screw or knob. Then, remove the guide bar by loosening the nuts or clips on the side cover and sliding the guide bar off the saw. Use a screwdriver or appropriate tool to remove the screws or fasteners securing the clutch cover. With the clutch cover removed, you can access the clutch drum. Hold the drum in place and turn the retaining bolt counterclockwise to loosen it. Carefully slide off the clutch drum. This replacement part is sold individually.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 threa...Read mored and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.

It is a genuine manufacturer-sourced component which is specially produced for use with Husqvarna and Poulan lawn and garden equipment. This replacement gasket is used to provide an air-tight seal for the fuel cap to prevent any leaks. Over time the material may begin to deteriorate and crack eventually requiring replacement. It is a high...Read more-quality component which is made of durable rubber material and it is sold individually.

This screw is an authentic OEM part which made for Husqvarna chainsaws. It is designed for multiple uses based on your tool. Please refer to diagrams for correct location and applied use of this screw. It includes one (1) metal screw per order. This is a hex head item so you would need a hex key/allen wrench to install or remove it.

This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap y...Read moreour spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install this component.

This is a genuine OEM part. The retaining ring is made for use with many chainsaws, and is used to help secure clutch drum components. The hardened metal component is sold individually. A hex key, screwdriver and pair of pliers are often required for the repair.

This chain tensioner kit is an authentic manufacturer sourced replacement part It is specially designed for Husqvarna and Poulan chainsaws. This kit is used to apply adjustable tension to the chain. If the bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged. This kit in...Read morecludes an adjustment bold, pin and a square nut. To complete this repair job you will need a set of wrenches and a screwdriver.

This replacement hardware is an authentic OEM sourced item, it is not an aftermarket imitation. It is commonly utilized on Husqvarna and Poulan chainsaws. This screw has multiple applications depending on the equipment. Please make sure to check appropriate diagrams for correct location and use of this hardware. One hex socket head screw is included per order.

This is a genuine OEM supplied replacement hardware that is specially made for use with Husqvarna and Poulan chainsaws. It helps to distribute the pressure evenly between the connecting pieces, for correct location and use of this item make sure to check appropriate diagram of your model. This part is made from high quality metal and it is sold individually.