2075R - Overview

This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this part may break due to wear, and you will know it is broken because it will completely stop functioning. A troubleshooting tip is to tap t...Read morehe part on theg round to see if the cutting line advances. This is an easy repair to make, and does not require any tools. You will need to look for the bump head attachment point on the bottom of the cutting head assembly.

This OEM bump head knob assembly, known simply as the bump head assembly sometimes, advances the line on your trimmer in the spool. Black in color, it is made of plastic and steel and is sold individually. Tap your trimmer on the ground to see if the cutting line advances to determine if there is a problem with this part. If it will no ...Read morelonger feed, it is likely that this part needs to be replaced. Most of our customers rated this repair as easy. You can attach your new part to the cutting head with no special tools required to complete the repair.

This is a genuine OEM replacement part, it is sold individually. The propose of the Reel and Line Assembly is to dispense the cutting line for the trimmer models below. This is a dual line trimmer. The diameter of the line used in this reel is 0.080

This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.

Genuine OEM replacement part, this item is sold individually. The 791-181459 Spring is installed in the 753-04257 slider. When not activated this part will keep the cutting line from coming out of the spool. When the Bump Head Knob Assembly is hit on the ground the springs and slider will be forced up into the spool housing releasing the ...Read morecorrect amount of cutting line. Most of the trimmers will use two of these springs.

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose is to keep pressure on the Bump Head Knob Assembly.

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

Genuine OEM replacement part, this item is sold individually. The 753-04257 Slider is part of the cutting string release system for the Trimmers listed below. If your trimmer is not releasing the cutting line properly check this part for wear and all of the other parts associated with it.

This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It\\\'s used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-rin...Read moreg, use care to ensure that the right one is being used in the right spot. This ring is sold individually.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.