2050218U Cub Cadet Lawn Mower - Overview

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This is a genuine OEM lube fitting part made for use with various outdoor lawn equipment models and measures 3/16-inch wide. Sold as an individual part, this grease/lube fitting is made of metal and is used to deliver lubrication to whatever it is attached to for better performance, through a small passage in the fitting. If your lube fit...Read moreting needs to be replaced, it may require pliers and a hex wrench for that process. Check your user manual or any diagrams to make sure this is the correct part for your equipment.

This is a genuine OEM sourced replacement screw which is commonly utilized on MTD and Yard Machines lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this screw. This durable metal hardware is sold individually.

This is an authentic replacement part generally used on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer and it is sold individually. This nut is a standard hardware which has multiple uses based on equipment. Please refer to appropriate diagrams for correct use/application of it. Please note you would need a wrench when working with this left hand threaded nut.

The cotter pin goes next to the flat washer. This authentic item is supplied directly from the original equipment manufacturer for use with lawn tractors, chippers, and edgers made by MTD, Yard Machines, Troy-Bilt, Bolens, Yard Man, and Cub Cadet. This part is made out of metal and is sold individually. A set of pliers might be helpful du...Read morering the installation of this part. It will need to be replaced if it breaks or bends.