20426997790 Kenmore Canister Vacuum - Overview

Diagrams for 20426997790

See every part. Know exactly what you need.

Parts for the 20426997790

Agitator Cap Kit

Part #285285

This agitator cap kit consists of the agitator cap itself, a hold down screw, and a seal. The agitator cap is white and made of plastic. Also, the cap is about three inches in diameter as well as three inches long. This cap kit will fit all of Whirlpool/Kenmore's spline driven agitators, except for those ones that are direct drive models.

Belt Drive Motor Kit with Capacitor

Part #285222

This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.

MOTOR-DRVE

Part #386614

PIPE

Part #75095

BUMPER

Part #75003

WASHER

Part #75013

BUSHING, MALE

Part #75069

BEARING KIT

Part #75076

BEARING Assembly

Part #75103

O RING

Part #75127

ADHESIVE

Part #75151

CABINET

Part #75225

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

It was the heat safety switch in the old drive motor

2 of 3 people found this instruction helpful.

Andrew from HATTIESBURG, MS
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward

Was this helpful?

Washer Had A Continuous Moan And Vibration

Roger from Millis, MA
Really Easy
30 - 60 mins
Nutdriver, Wrench set

I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred th ... Read more

Read less

Was this helpful?