20407 Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This OEM Carburetor Bowl Gasket attaches between the carburetor bowl and carburetor in order to seal the parts together. This model is rubber, black, and comes individually sold. Installation is rated as "Easy" by customers, and will require pliers and a socket set. If the part becomes broken due to wear/damage then there may be a fuel le...Read moreak, and the part will need to be replaced. Refer to your make, model and diagrams to ensure you've chosen the correct part.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

Carburetor Kit

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

The Rear Deflector is a 17.5 inch part which attaches onto the rear of the mower's deck, in order to deflect objects from flying out the back of the mower. This OEM black, plastic part is rated as "easy" to install and requires a screw driver, and socket set. Refer to your make, model and diagrams to check if this is the right part.

This blade is an authentic Murray replacement part. It is compatible with over 150 models of lawn mowers. There are several simple steps which can be followed to replace this part. You will need a wrench to complete these steps. - Remove the spark plug wire - Wedge a board in the mower to stop the blade from turning - Remove the blade bo...Read morelt and washers - Remove the old blade - Place the new blade on the shaft - Install the washers on the shaft - Tighten the blade bolt - Replace the spark plug wire

This is an authentic Toro replacement part manufactured for use with walk-behind lawnmowers. Mower blades eventually wear down from normal use and will require replacement. This special blade is designed for use with mower that use a grass bagging attachment. The blade is sold as an individual replacement part.

An authentic replacement part that is specially manufactured for use with Toro lawn mowers. This is the knob that is secured to the heigh-adjustment arm assembly, for correct location and uses make sure to check appropriate diagrams of your model. Please note this durable plastic part is sold individually.

A genuine item that is supplied directly from the original equipment manufacturer for use with Murray lawn and garden equipment. This is an authentic replacement for a missing or damaged tire and rim assembly which originally came with the new unit. It is a high-quality item which includes one durable rubber tire and one plastic rim. Over...Read more time components tend to wear out or they might get damaged eventually requiring a replacement.