Models > 20373

20373 Toro Lawn Mower - Overview

Models starting with 20373

Exact Part matches for your search term

[Viewing 2 of 2]
LINK-IDLER ARM LT – Part Number: 20373
LINK-IDLER ARM LT
This part number matches the current model number 20373
PartSelect #: PS9451636
Manufacturer #: 20373
  No Longer Available
Pc Board – Part Number: 20373
Pc Board
This part number matches the current model number 20373
PartSelect #: PS12750857
Manufacturer #: 20373
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Washer-Stepped – Part Number: 614426
Washer-Stepped
★★★★★
★★★★★
(1)
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$2.99
  In Stock
Order within the next 9 hrs and your part ships today!
Baffle-Front – Part Number: 114-7963-01
Baffle-Front
PartSelect #: PS8845729
Manufacturer #: 114-7963-01
$34.09
  In Stock
Order within the next 9 hrs and your part ships today!
Chute-Discharge, Side – Part Number: 115-8447
Chute-Discharge, Side
★★★★★
★★★★★
(1)
PartSelect #: PS8847392
Manufacturer #: 115-8447
$15.79
  In Stock
Order within the next 9 hrs and your part ships today!
Blade-22 Inch – Part Number: 131-4547-03
Blade-22 Inch
★★★★★
★★★★★
(1)
PartSelect #: PS11804777
Manufacturer #: 131-4547-03
This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. Yo...
$27.91
  In Stock
Order within the next 9 hrs and your part ships today!
Bearing-Ball – Part Number: 104-8699
Bearing-Ball
PartSelect #: PS8824569
Manufacturer #: 104-8699
$3.79
  In Stock
Order within the next 9 hrs and your part ships today!
Bolt-Shoulder – Part Number: 614650
Bolt-Shoulder
PartSelect #: PS9046634
Manufacturer #: 614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket...
$4.56
  In Stock
Order within the next 9 hrs and your part ships today!
Nut-Lock, Ni – Part Number: 3296-29
Nut-Lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$2.99
  In Stock
Order within the next 9 hrs and your part ships today!
Screw-Hwh – Part Number: 46-8091
Screw-Hwh
PartSelect #: PS8974798
Manufacturer #: 46-8091
$3.64
  In Stock
Order within the next 9 hrs and your part ships today!
Washer – Part Number: 40-1940
Washer
PartSelect #: PS8963619
Manufacturer #: 40-1940
$2.99
  In Stock
Order within the next 9 hrs and your part ships today!
Frame-Bag – Part Number: 114-2679-03
Frame-Bag
PartSelect #: PS8843654
Manufacturer #: 114-2679-03
$60.61
  In Stock
Order within the next 9 hrs and your part ships today!
Support-Blade – Part Number: 108-3766-03
Support-Blade
PartSelect #: PS9257416
Manufacturer #: 108-3766-03
The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a sock...
$10.14
  In Stock
Order within the next 9 hrs and your part ships today!
Deflector-Side – Part Number: 115-8449
Deflector-Side
★★★★★
★★★★★
(1)
PartSelect #: PS8845543
Manufacturer #: 115-8449
$8.68
  In Stock
Order within the next 9 hrs and your part ships today!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Parts Used:
Arm-Spring
  • Ray from YARDLEY, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench set
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torsion spring broken
I pryed the apart the torsion spring lever from the handle with a large screw driver. It wasn't easy putting it back, but it worked
Parts Used:
Spring-Torsion
  • Henry from ORLAND PARK, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!