My Orders
2031 - Overview
Models starting with 2031
Click on the best match to narrow your results.
- 20311 ( 8000001-8999999 1968 ) Toro Lawn Mower (21-in. Whirlwind Implement)
- 20311 ( 9000001-9999999 1969 ) Toro Lawn Mower (21-in. Whirlwind Implement)
- 20311 (9000001 - 9999999) Toro Lawn Mower (21-Inch Whirlwind Implement)
- 20311 (8000001 - 8999999) Toro Lawn Mower (21-Inch Whirlwind Implement)
- 20312 Greenworks Chainsaw (40v Cordless 16 Brushless Chainsaw)
- 203120 Jet Hoist & Winch (1 Ton 20 Foot Lift And Overload Protection)
- 20313 ( 000000001 - 000999999 1970 ) Toro Lawn Tractor Accessories (21 Inch Whirlwind Implement)
- 20313 (1000001 - 1999999) Toro Lawn Mower (21-Inch Whirlwind Implement)
- 20313 ( 0000001-0999999 1970 ) Toro Lawn Mower (21-in. Whirlwind Implement)
- 20313 ( 1000001-1999999 1971 ) Toro Lawn Mower (21-in. Whirlwind Implement)
- 20313 (0000001 - 0999999) Toro Lawn Mower (21-Inch Whirlwind Implement)
- 203130 Jet Hoist & Winch (1 Ton 30 Foot Lift And Overload Protection)
- 20314 (311000001-311999999) Toro Lawn Mower (20in Recycling/rear Bagging Lawn Mower, 2011)
- 20316 (311000001-311999999) Toro Lawn Mower (20in Recycler/rear Bagging Lawn Mower, 2011)
- 20318 Toro Lawn Mower (Toro Lawn Mower Model 20318 Parts)
- 20319 (313000001 - 313999999) Toro Lawn Mower (20in Recycler/Rear Bagging Lawn Mower)
- 20319 (314000001 - 314999999) Toro Lawn Mower (20in Recycler/Rear Bagging Lawn Mower)
- 20319 (315000001 - 315999999) Toro Lawn Mower (20in Recycler/Rear Bagging Lawn Mower)
- 20319 (316000001-316999999) Toro Lawn Mower (20in Recycler/Rear Bagging Lawn Mower)
- 20319 ( 313000001-313999999 2013 ) Toro Lawn Mower (20319, 20in Recycler/Rear Bagging Lawn Mower, 2013 (Sn 313000001-313999999))
- 20319 ( 314000001-314999999 2014 ) Toro Lawn Mower (20319, 20in Recycler/Rear Bagging Lawn Mower, 2014 (Sn 314000001-314999999))
- 20319 ( 315000001-315999999 2015 ) Toro Lawn Mower (20319, 20in Recycler/Rear Bagging Lawn Mower, 2015 (Sn 315000001-315999999))
- 20319 (400000000-999999999) Toro Lawn Mower (20319, 20in Recycler/Rear Bagging Lawn Mower, (Sn 400000000-999999999))
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.55
In Stock
Stepped Washer
Part #614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. Installation is rated as "Easy" by customers and will require a socket set. This part is individually sold, gray, and constructed of metal. R...Read moreefer to your make, model and diagrams to check if this is the right part for you.
Read less
$6.55
In Stock
Shoulder Bolt
Part #614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket and is rated as "Easy" by customers. It is mostly used to keep the wheel in place. It fits onto the unit frame and if broken or removed, th...Read moree wheel will fall off. Refer to your make, model and diagram to ensure this is the correct part.
Read less
$6.55
In Stock
Bearing-ball
Part #104-8699
This is a Genuine OEM replacement part used on a variety of Lawn Mowers. This item is made out of Metal and it is Sold Individually. If either the ball bearing or the bearing retainer wear out this will cause the wheels have trouble turning. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the lo...Read moread and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Read less
$6.40
In Stock
Screw-taptite
Part #95-1726
This is a high quality replacement hardware that is specially manufactured for use on Toro lawn and garden equipment. Two of these screws are generally used to secure the belt guide to the mower deck. Please note this durable metal hex head taptite screw is included per order.
$46.15
In Stock
Brake Cable
Part #112-8818
This genuine OEM replacement cable is designed for select Toro and Lawn Boy walk-behind lawnmowers. As a critical component of the mower's safety system, it engages the blade control mechanism and stops blade rotation when the control bar is released.
Over time, normal wear and tear can cause the cable to fray, stretch, or break at the en...Read moreds, resulting in reduced performance or complete failure. If the cable becomes damaged, replacement is recommended to restore safe and proper operation.
Installation is straightforward and typically requires only basic hand tools, such as pliers, a wrench, and a screwdriver. This replacement cable is sold individually.
Read less
$6.55
In Stock
Screw-hwh
Part #46-8091
This screw is an OEM part sourced directly from the manufacturer and is used in Toro snowthrowers. It requires a wrench and connects the ring-chute to the chute-discharge. The screw is made of metal and is sold as an individual part. Screws will need to be replaced when they become stripped.
$6.55
In Stock
Nut-lock, Ni
Part #3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced.
Customers found this to be an easy repair.
Read less
$6.55
In Stock
Screw-taptite
Part #32144-1
This authentic manufacturer-sourced screw-taptite is made for use with Toro and Lawn-Boy lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this screw. It...Read more is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.
Read less
$6.40
In Stock
Washer
Part #40-1940
This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appear worn or cracked, causing the rear wheel to feel misaligned or wobble excessively. If not replaced, it can lead to increased wear and expen...Read moresive repairs. To remove the existing washer, prop up the wheel with a two by four, use a wrench to remove the bolt securing the wheel, slide out the wheel, and then remove the bolt on the rear adjuster to take off the washer. Please note that this washer is sold individually, so make sure to check the quantity needed for your machine before making your purchase.
Read less
$21.95
In Stock
V-belt
Part #110-9429
This replacement v-belt is a genuine OEM approved part that is designed for use with Toro lawn mowers. It is the main belt that rotates the mower blade. Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to ma...Read moreintain optimum performance. This part is made from durable rubber material and it is sold individually.
Read less
$15.33
In Stock
Support-blade
Part #108-3766-03
The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a socket set and wrench set. It attaches to the blade assembly. If there are rattling sounds or other srange sounds coming from the blade area tha...Read moret is a sign the part has been broken or damaged due to wear or fatigue and should be replaced. Refer to your make model, and diagrams to ensure you choose the right part.
Read less
$46.15
In Stock
Cable-traction
Part #112-8817
This is a genuine manufacturer-sourced replacement part which is specially designed for use with Toro and Lawn Boy lawn mowers. The traction cable engages the drive wheels, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated part is sold individually.
Exact Part matches for your search term
No Longer Available
$33.19
Special Order
$38.06
Special Order
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The hub that the mower blade mounts to was broken
8 of 26 people
found this instruction helpful.
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
Other Parts Used:
Was this helpful?
Thank you for voting!