2030SZ Makita Planer Jointer - Overview

This is an Authentic OEM Approved replacement part designed for use with Makita Planers/Jointers. This part is made out of Metal and it is Sold Separately. This part helps to secure the Roller and allows it to spin smoothly. To replace this part you would need Retaining Ring Pliers, Screwdriver and a Set of Wrenches.

Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.

This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Over time, power tool cords will wear out or become frayed. We recommend replacing a cord as soon as signs of wear are visible. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 8 Feet Long

This authentic replacement ball bearing which is supplied by the original manufacturer, it is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, they experience constant wear from pressure, heat, vibration, and friction eventually requiring replacement to maintain peak per...Read moreformance. It is generally used as one of the armature bearings, for correct application make sure to check appropriate diagrams of your model. This part is made of high-quality metal and it is sold individually.

This genuine Makita replacement part is designed for use with a variety of power tools. This screw is a standard hardware which has multiple applications based on your tool. It is made out of metal and it is sold individually. Would require a screwdriver to install or remove this screw.

This is a high quality item that is specially manufactured for use with Makita power tools. It is a standard hardware which has multiple used depending on the tool, please make sure to check appropriate diagrams for correct use and application of this screw. One durable metal pan head screw is included per order.

This item is available as an individual replacement part. The strain relief attaches to the gear housing. When replacing this item a screwdriver may be needed. It is made of plastic and will require replacing if it breaks. This is a genuine replacement part sourced from the original manufacturer for use with jointers, planers, and saws made by Makita.

This replacement hardware is a genuine OEM sourced part, it is not an aftermarket imitation. It is a commonly used with Makita power tools. This standard hardware has multiple applications depending on the tool. Please refer to appropriate diagrams for correct location and use of this screw. It is a pan head screw which is sold individual...Read morely. You will need a Phillips head screwdriver to install or remove this hardware.

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fi...Read morex an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This genuine OEM woodruff key is a small, semicircular metal piece used in various power tools to connect rotating parts, such as shafts or gears, to other components like wheels or pulleys. It prevents slippage between these parts, ensuring smooth synchronization and power transmission. With a width of 3/32 inches and a length of 5/8 inc...Read morehes, consider replacing a woodruff key if you notice misalignment or excessive movement between the connected parts. Be sure to inspect the key for signs of wear, damage, or bending. Removing the key depends on the make and model of your tool. If the key is visible, gently tap it from one side using a small hammer and a punch or drift pin. This will dislodge it from its slot. If the key is stuck or difficult to access, you may need to partially disassemble the tool to gain better access to the key. Once the key is loose, carefully pull it out using pliers. Clean the keyway and slot before installing the new key. Before making your purchase, remember that this component is sold individually.

This is a genuine Makita replacement tapping screw. It is sourced directly from original equipment manufacturer for use with a variety of power equipment. This screw is a piece of standard hardware that has multiple uses depending on your tool. Please check appropriate diagrams to ensure correct location and application for this item. It ...Read moreis a metal pan head screw that requires a screwdriver to install/remove it. Includes one (1) screw per order.

This is an authentic Makita replacement part manufactured for use with angle grinders and circular saws. The sealed bearing is used to reduce friction between a rotating shaft and fixed housing or assembly. This bearing is often used to allow the spindle to rotate inside the gear box, but may have other uses. Please see model diagram for part location and usage. This bearing is sold individually.