20224 Murray Lawn Mower - Overview

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This is an authentic replacement part manufactured for use with Murray walk-behind lawnmowers. This special bracket is used to link the stop cable to the stop lever. This bracket is sold as an individual replacement part, please see model diagram for associative parts.

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

Wheel Assembly 7 x 1

This Washer (.40.81 16g Flt) is a black, metal part, requiring a socket set to install. Installation is rated as "Easy". This washer can be used to provide a tight fit between connected components. It attaches onto the bell crank between the adjusting nut and cotter pin. Refer to your make, model and diagrams to check if this model is right for you.

This is an authentic replacement part manufactured for use with Murray walk-behind lawnmowers. Lawnmower blades can wear out over time causing the blade to tear and fray the grass blades. Replacing a worn mower blade can provide a cleaner cut that can improve the look of the lawn. This blade is available as an individual replacement part.

Adapter-blade 7/8x2.3

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal bolt is used to secure the blade to the blade adapter. A hex socket wrench is needed to install this part. This item is available as an individual replacement part.

This is an OEM part source directly from the manufacturer. The blade adapter is commonly found in lawn mowers from Murray. This part is made of metal, and is used to connect the mower blade with the mower deck. You will require a wrench when replacing this item. The blade adapter is provided as an individual replacement part.

This is the special bolt-hex which is utilized to secure the mower blade. It is an identical replacement for the hardware that was installed on a new equipment. Check the owner\'s manual and the parts diagrams for your specific model to ensure the correct replacement procedure. This high-quality bolt-hex is made of durable metal and is so...Read moreld as an individual item. It is supplied by the original manufacturer for Murray and Snapper lawn mowers. Note, a wrench will be needed to secure or remove it.