2012NB Makita Planer Jointer - Overview

This is an Authentic OEM Approved replacement part designed for use with Makita Planers/Jointers. This part is made out of Metal and it is Sold Separately. This part helps to secure the Roller and allows it to spin smoothly. To replace this part you would need Retaining Ring Pliers, Screwdriver and a Set of Wrenches.

This is a ten (10) pin sprocket assembled by original manufacturer. It is used in some Makita planers. Sprockets engage gears and/or chains. These parts are designed to be replaced fairly often due to wear and tear from regular use. Sold individually.

This is a genuine manufacturer-approved component which is designed for Makita planers. It is an identical replacement for a missing or a damaged straight bevel gear that was installed on a new unit. Refer to the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure. Note, this high-quality straight bevel gear is made of a durable metal and is sold as an individual item.

Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.

This authentic replacement part which is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, over time components may begin to wear out and fail eventually requiring a replacement. Please note this high-quality ball bearing is made of durable metal and it is sold individually.

This is a genuine Makita replacement part that includes two carbon brushes with wire leads attached. Carbon brushes are essential components in power tools and are among the most commonly replaced parts due to regular wear from friction. Over time, worn brushes can cause a motor to run poorly, operate intermittently, or lose electric brak...Read moreing power. Replacing them can often restore your tool’s performance. A worn brush may appear cracked, pitted, burned, or worn down near the wire lead. It’s always best to replace both brushes at the same time, even if only one shows signs of wear. When installing new brushes, be sure to inspect the armature for any damage such as burns or cracks, which could indicate more serious motor issues.

This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Over time, power tool cords will wear out or become frayed. We recommend replacing a cord as soon as signs of wear are visible. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 8 Feet Long

This is a genuine manufacturer-sourced replacement bolt which is specially designed for use with Makita saws. It is a standard hardware which has multiple uses depending on the model of your unit, please make sure to check appropriate diagrams of your unit for the correct location and use of this item. This high-quality hex socket head bolt is made of durable metal and it is sold individually.

This is an original Makita replacement part manufactured for use with planers. This polyurethane v-belt drives the v-pulley on the blade drum. It is recommended to clean the pulleys when installing the belt, please note the belt is sold individually.

This authentic replacement ball bearing which is supplied by the original manufacturer, it is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, they experience constant wear from pressure, heat, vibration, and friction eventually requiring replacement to maintain peak per...Read moreformance. It is generally used as one of the armature bearings, for correct application make sure to check appropriate diagrams of your model. This part is made of high-quality metal and it is sold individually.

This is an authentic replacement part manufactured for use with Makita planers. The flat washer is commonly used to disperse pressure put on a part assembly across a wider surface area. This washer is available as an individual replacement part.

Genuine Makita replacement part, this item is sold individually. The purpose of the Brush Holder Cap is to retain the brush in the brush holder. This Brush Cap is used on all the Makita models listed below. It is removed by using a slotted screwdriver Do not press too hard when removing the cap they do have a tendency to break.