20111X1 Lawn Mower - Overview

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This is an authentic replacement part manufactured for use with Murray walk-behind lawnmowers. This special bracket is used to link the stop cable to the stop lever. This bracket is sold as an individual replacement part, please see model diagram for associative parts.

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is an original part from Murray. The (43.50 20pnfclx lh) stop cable is composed of metal, wiring and plastic, and is sold individually. This item is fastened to the stop lever and the engine, allowing the operator to stop the mower engine when the handle is released. A screwdriver and pliers may be helpful for the repair.

This item has been sourced from the original manufacturer to be used with walk-behind lawnmowers from Murray. The plastic cable fastener attaches to the lower handle. This item is used to secure the cable to the handle shaft to keep the cable secure and out of the way. This item is sold as an individual replacement part.

Wheel Assembly 7 x 1

This Washer (.40.81 16g Flt) is a black, metal part, requiring a socket set to install. Installation is rated as "Easy". This washer can be used to provide a tight fit between connected components. It attaches onto the bell crank between the adjusting nut and cotter pin. Refer to your make, model and diagrams to check if this model is right for you.

This is an authentic replacement part manufactured for use with Murray walk-behind lawnmowers. Lawnmower blades can wear out over time causing the blade to tear and fray the grass blades. Replacing a worn mower blade can provide a cleaner cut that can improve the look of the lawn. This blade is available as an individual replacement part.

This replacement screw is supplied directly from the original equipment manufacturer for use with Murray walk-behind lawn mowers. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this part. This is a high-quality co...Read moremponent which is made of durable metal and it is sold individually, the washer is included.

Guard rear 20 p-07 s