20078 Toro Lawn Mower - Overview

The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. Installation is rated as "Easy" by customers and will require a socket set. This part is individually sold, gray, and constructed of metal. R...Read moreefer to your make, model and diagrams to check if this is the right part for you.

The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket and is rated as "Easy" by customers. It is mostly used to keep the wheel in place. It fits onto the unit frame and if broken or removed, th...Read moree wheel will fall off. Refer to your make, model and diagram to ensure this is the correct part.

This is a Genuine OEM replacement part used on a variety of Lawn Mowers. This item is made out of Metal and it is Sold Individually. If either the ball bearing or the bearing retainer wear out this will cause the wheels have trouble turning. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the lo...Read moread and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

This is a genuine manufacturer supplied replacement part. It is specially made for use with Toro lawn mowers. It is mounted to the side of the mower for the cut grass to be expelled out of it. This part is made out of plastic and it is sold individually. Please note the hinge bracket assembly and spring used to secure this deflector are sold separately.

The metal blade driver assembly attaches to the blade with the guide belt wrapped around it. The spacer will go inside the driver. This part is used in lawn mowers. If the lawn mower wheels will not turn you may need to replace the blade driver. A wrench will be needed to replace this part if it becomes damaged. The driver is available as an individual replacement item and is an original Toro part.

It is a genuine manufacturer-sourced item that is specially made for Toro and Lawn Boy lawn mowers. The drive control cable is the cable that stops the blade when the control handle is released. This part provides an identical replacement for a missing or a faulty bail-brake that was installed on a new unit. Please make sure to refer to t...Read morehe appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality bail-brake is made of durable metal and is sold individually.

This item is a genuine Toro replacement part that is OEM sourced to ensure quality. The plastic knob is intended to be used with walk-behind lawnmowers. This item attaches to the height adjustment lever and is used as a grip when changing the cutting height of the deck. The lever knob is priced individually and four may be needed.

This Genuine OEM Torsion Spring is specifically engineered for use with Toro lawn mowers, ensuring reliable performance and compatibility. Crafted from durable metal, this high-quality replacement part is designed to facilitate the retraction of the control bar, contributing to the safe and efficient operation of your equipment. The sprin...Read moreg is sold individually and is an exact match for original Toro components, making installation straightforward for most users with basic mechanical knowledge. Whether you're performing routine maintenance or replacing a worn component, this torsion spring offers the durability and precision you expect from Toro OEM parts.

The guide-belt goes next to the retainer kit-spacer. This is an OEM part sourced directly from the manufacturer and used in lawn mowers made by Toro and Lawn Boy. This item is available as an individual replacement part. When replacing this item a wrench set might be required during the installation process. It is made of metal and will require replacing if it breaks.

This is an authentic replacement part that is sourced from the original manufacturer to be used with walk-behind lawnmowers from Toro and Lawn Boy. The metal washer is commonly used to provide spacing for the bolt that secures the front pivot bracket. This washer is sold as an individual replacement part.

It is a genuine manufacturer sourced replacement part is specially designed for use with Ridgid wet and dry vacuums. This caster wheel helps to secure the wheel that allows for easy transportation. It is made from durable plastic and it is sold individually, please note the caster wheel itself is sold separately.