This is a genuine Coleman replacement tent pole. This features a hollow fiberglass pole with a 6.3 mm diameter. The parts for one individual pole are included; there are five 30" pole sections. This part requires some light assembly prior to use.
This is a flexible fiberglass pole with a 6.33mm diameter. It is an authentic OEM part sourced directly from Coleman. Note that the rubber end tips, metal end tips, metal connection pieces, and one 11' shock cord are included in this kit. It is one pole split into five pieces; some light assembly will be required before use.
This genuine Coleman replacement light is used with Elite tents. This part is basically equivalent to the light bulb portion of the light because it needs to be attached to the Light Socket / Wiring / Door Switch (part # 5010000692) and connected to a power source in order to work. To install this part, simply align tabs on the Tent Light...Read more with the socket and gently rotate clockwise until secured into position, being careful not to over-tighten. This Part is Compatible with the Following Alternative Power Sources: • 6V NiMH Rechargeable Battery Pack, Part Number: 2000002672 • 6V Sealed Lead Acid Rechargeable Battery Pack, Part Number: 2000003287
This is a genuine OEM replacement assembly. It is part of the Coleman Tent Lighting System used in Elite tents. It connects between the power switch at one end and the red on/off switch at the other end; the center of the line is where the socket for the LED Light (the light bulb, part # 5010000693) is connected. This Part is Compatible ...Read morewith the Following Alternative Power Sources: • 6V NiMH Rechargeable Battery Pack, Part Number: 2000002672 • 6V Sealed Lead Acid Rechargeable Battery Pack, Part Number: 2000003287
This is a genuine Coleman replacement pole. It is a steel pole designed to help create a frame that holds the tent fabric in place. This is the long leg pole; the short leg pole is available separately as part # 5010000610. It is a hollow steel pole with a 19mm diameter. This two-part pole will require light assembly before use.