19G412-1180-E2 Briggs and Stratton Engine - Overview

Diagrams for 19G412-1180-E2

See every part. Know exactly what you need.

Parts for the 19G412-1180-E2

$6.40

Starter Pawl-Ratchet

Part #281505S

The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will have a hard time engaging the fly wheel, making the engine harder to start, and should be replaced. Installation is rated as "Easy" by cust...Read more

Read less

$8.09

Engine Oil Seal

★★★★★

(1)

Part #391086S

The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "Medium" difficulty and requires a screw driver, wrench set and seal puller. A broken seal will cause a leak, and the part must be replaced. R...Read more

Read less

$9.08

Connector-hose

★★★★★

(1)

Part #692317

This is a Genuine Manufacturer Sourced replacement part used on a a variety of Engines. This is a Fuel Line Connector connects the fuel line to the carburetor. This part is made out of Plastic and Metal, it is Sold Individually.

$6.40

Filter Fuel Mega Pack

Part #394358B

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read more

Read less

$19.42

Pulley-starter

Part #295871

Difficulty pulling the starter rope or a cord that stays extended can result from a damaged recoil pulley. This wheel guides and stores the rope while helping turn the engine during starting. Similar symptoms can come from a frayed rope, seized engine, bent starter housing, broken pawls, or weak return spring, so check those items first. ...Read more

Read less

Spring-rewind Str

Part #490179

This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually. Over time, you may notice that you are having trouble retracting your pull cord, which could be a symptom of the rewind starter spring f...Read more

Read less

$6.40

Key-flywheel

★★★★★

(1)

Part #222698S

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

$6.40

Gasket-float Bowl

★★★★★

(1)

Part #281165S

This is a Genuine OEM replacement part used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.

$48.09

Clutch-starter

★★★★★

(2)

Part #399671

Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turns the crankshaft during starting and lets go when the engine runs. First inspect the rope, rewind spring, pulley, flywheel screen, and clutc...Read more

Read less

$6.40

Plate-pawl Friction

★★★★★

(1)

Part #692299

This is a genuine OEM sourced replacement part. It is designed for use with lawn and garden engines. It is an important part of the starter assembly that is used to crank start the unit. Please note shroud/housing, starter pulley, starter spring, grip, the pull rope and the hardware are all sold separately. This pawl plate is made out of ...Read more

Read less

$15.76

Deflector-muffler

Part #796956

This item is available as an individual replacement part but also includes the screws. The muffler deflector attaches to the lo-tone muffler and is made of metal. A nutdriver might be required during the replacement of this item. It may become broken and will need to be replaced. This is an authentic Briggs & Stratton and Toro replacement...Read more

Read less

$7.88

Gear-pinion

Part #695708

This is a manufacturer approved starter pinion gear designed for use with lawn and garden equipment engines. This Starter pinion gear is attach to the starter clutch drive and engages the flywheel to start the engine. It is made out of Plastic and Aluminum and it is Sold Individually.

Questions And Answers for 19G412-1180-E2

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Robert - For model number 19G412-1180-E2

February 15, 2024

I need a simple on or off rotate switch which fell out after 20 minutes of use during a recent power outage. Where will I find one to replace. Also would I be able to purchase a starter kit to replace the manual pull start. I’ve had this generator for many years w! 20 minutes of run time and no muscle to start a 10hp B&S engine.at my elderly age. Purchased Coleman generator 1/07/99 w/10hp B&S engine

Hi Robert, thank you for contacting us. The rotary switch for your model is part number PS9074729, and the starter motor is part number PS8983858. We hope this helps.

$124.84

Motor-starter

$29.40

Switch-rotary

2 people found this instruction helpful.

Was this helpful?

Howard - For model number 19G412-1180-E2

September 15, 2022

On the carburetor page Part 94 is listed twice as #494383 and #496589. What is the Difference? Thanks

Hello Howard, Thank you for the question. The Part Number:496589 is Lmt 149, 150 and the Part Number:498836 is Lmt 141. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We hope this helps!

Was this helpful?

Tom - For model number 19G412-1180-E2

May 25, 2023

do you have a fuel pump for this model

Hi Tom, thank you for reaching out. The fuel pump for your model is part number PS9141024. We hope this helps!

$39.21

Pump-fuel

Was this helpful?

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Gas tank leaking, pull starter rivets worn, rope and rope bushing worn

3 of 10 people found this instruction helpful.

Dennis from EUFAULA, OK
Easy
30 - 60 mins
Nutdriver, Screw drivers, Socket set, Wrench set

The gas tank was a simple job, close the fuel shut off, remove fuel hose then back out 2 bolts on the mounting bracket. Reverse procedure to mount.
To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill sw ... Read more

Read less

Other Parts Used:

Tank-fuel

Starter-rewind

Was this helpful?

Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.

12 of 46 people found this instruction helpful.

Alberto from PALMETTO BAY, FL
Really Easy
30 - 60 mins
Socket set

Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.

Was this helpful?