195-469-000 (1985) MTD Lawn Tractor Accessories - Overview

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This screw is a high quality hardware that is specially manufactured for use on MTD and Yard Machines lawn and garden equipment. It is an authentic part that has multiple uses depending on the equipment. Make sure to check appropriate diagrams for correct location and applications of this screw. Please note, one hex head screw is included per order that will require a wrench to install or remove it.

This OEM Hex Nut is a gold colored, metal, 3/8 x 16 part, sold individually. It is installed with a wrench, or socket and torque wrench, by torquing to the manufacturer specfications, and is used to secure parts in place. You will know it is broken when you see the nut has damaged threads or rounded off edges, which can happen due to fa...Read moretgiue. If it is damaged, it should be replaced. This part can have different uses and different degrees of difficulty depending on the part the hex nut is securing, but generally the replacement of this part is an easy job.

This is an authentic replacement part sourced directly from the manufacturer. The flat washer is commonly found in yard equipment from MTD and Ryobi, such as snow throwers, lawn tractors, tillers, and blowers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that ther...Read moree are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this item. The flat washer is available as an individual replacement part. Please note that in some of these models, the flat washer is secured with a push nut. Most push nuts are not reusable and will need to be replaced every time they are removed. If your model makes use of a push nut, you may want to purchase both parts at the same time.