1922 - Overview

This OEM Carburetor Bowl Gasket attaches between the carburetor bowl and carburetor in order to seal the parts together. This model is rubber, black, and comes individually sold. Installation is rated as "Easy" by customers, and will require pliers and a socket set. If the part becomes broken due to wear/damage then there may be a fuel le...Read moreak, and the part will need to be replaced. Refer to your make, model and diagrams to ensure you've chosen the correct part.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

Carburetor Kit

This authentic OEM supplied replacement part designed for use with Little Wonder electric hedge trimmers. This assembly includes one (1) carbon brush with a lead wire and a spring attached. Carbon brushes are a commonly replaced part on power tools. Due to constant contact and friction brushes will gradually wear down and will require re...Read moreplacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Remove screws from the housing • Remove housing to gain access to brush holders • Remove the brush retaining plate and take out the old brush • Re-assemble and test the tool

This replacement screw is a high quality item commonly utilized on Toro snowthrowers. It is a genuine OEM supplied hardware which has multiple uses depending on the equipment. Please make sure to check appropriate diagrams for correct location and application of this screw. This hex washer head screw is sold individually and it will require a wrench to secure of remove it.

The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a variety of equipment. If broken, damaged or worn, the part may be loose, and there may also be physical damage to the nut, at which time it...Read more should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is a genuine OEM sourced replacement flange nut that is specially produced for Little Wonder electric hedge trimmers. This nut will resists loosening when properly threaded onto a bolt. It is generally used to secure the blades and the bar together. Please note, it is sold individually. You will need a wrench to tighten or loosen this flange nut.

This is a genuine Little Wonder replacement part that has been sourced from the original manufacturer to be used with hedge trimmers. The metal screw is used to secure the blades, guard, and bar. This screw is available as a single item, please note the nut is separate.

This is a genuine manufacturer-sourced replacement gasket which is specially designed for use with Little Wonder hedge trimmers. The part provides an air-tight seal between connected parts, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the gasket may wear out an...Read mored begin to crack eventually requiring a replacement, keep in mind this high-quality composite material item is sold individually.