The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.
This OEM keyed blade adapter connects your lawn mower blade to the spindle, enabling it to rotate and cut the grass. It has a length of 1.19 inches, an inside diameter of 7/8 inches, and a bow tie center pattern. If you notice unusual grinding or rattling sounds coming from your mower, or if you feel excessive vibration in the handle or c...Read moreutting deck, it could indicate a broken blade adapter. Similarly, if the blade is not engaging properly or wobbling, it may be a sign that the adapter is worn out and needs replacement. To replace the adapter, start by tilting your machine backward to access the blade. Use a socket or wrench to unscrew the bolt that secures the blade. Then remove the support, blade, and adapter. When installing the new adapter, make sure to align the key on the adapter with the keyway on the shaft. Before operating your lawn mower, ensure that all of the components within the blade assembly are installed properly and securely in place. Please note that this replacement part does not include any accompanying hardware.
This authentic replacement blade is sourced directly from original equipment manufacturer for use with walk-behind lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes your grass clippings better as mulch since the smaller clippings will decompose quicker, releasing their...Read more nutrients into the soil. This part is made from strong, durable metal and it is sold individually.
The mulching blade goes between the bell blade support and the blade adapter. This is a genuine part sourced directly from the manufacturer for use in lawn mowers made by MTD, Yard Machines, Troy-Bilt, and Yard Man. It is made out of metal and is sold individually. When replacing this item a wrench might be required during the installation process. Over time this part may break or crack and will need to be replaced.
This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The plug is used to cover the side discharge chute to keep grass clipping inside the deck to allow the blades to cut the clippings into fine pieces. This mulching plug is available as an individual replacement part.