My Orders
1839 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The old thermostat would freeze everything even at the lowest setting.
16 of 19 people
found this instruction helpful.
-
Gerald from JACKSONVILLE, AR
- Easy
- 15 - 30 mins
-
Screw drivers
It was a simple matter of removal and replacement. The process was intuitive and very easy to do. Removal the old thermostat, extend the sensing tube and secure the tube to the bottom of the freezer compartment. Plug it back in, turn it on to the middle setting and see what happens. It worked and it was much cheaper than replacing th
... Read more
e otherwise good mini-fridge. Take a picture before you take anything apart, use your picture to guide the replacement.
Read less
Was this helpful?
Thank you for voting!
defective thermostate
2 of 4 people
found this instruction helpful.
-
carl from PHILADELPHIA, PA
- Easy
- 30 - 60 mins
-
Screw drivers
open frig cabinet - disconnect old part - replace with new part -very straight foreword
Was this helpful?
Thank you for voting!
Haier BrewMaster Kegerator Compressor Would Not Run
0 of 1 people
found this instruction helpful.
-
David M from Vista, CA
- Easy
- 30 - 60 mins
-
Screw drivers
Disconnected power, and pulled the two hot wires from the old thermostat. Jumpered the two thermostat wires and plugged the unit back in - Compressor Ran - telling me I had a bad thermostat. Replaced thermostat with the Part Select part noting how the old one was installed and my Kegerator was back in business!
Was this helpful?
Thank you for voting!
refir became a freezer only when the thermostat failed
0 of 2 people
found this instruction helpful.
-
john from Three Mile Bay, NY
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
r/r thermostat
Was this helpful?
Thank you for voting!