17E583 Graco Paint Sprayer - Parts

This part is available as an individual replacement. The cap attaches to the frame and is made out of plastic. A hammer may be necessary during the installation of this item. Over time this part may break and will need to be replaced. This item is an OEM from Graco for use in sprayers.

This is a genuine OEM sourced part which is specially designed for use with Graco sprayers. It is an identical replacement for a missing or a faulty threaded deflector that was included with a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of thi...Read mores component. Keep in mind this high-quality item is made of durable material and is sold individually.

This OEM wheel is constructed of plastic and rubber, and comes in black/white. It attaches onto the axle shaft to provide easy movement. Installation is rated as "Easy" by customers and will require a socket (Tip: Make sure tire is inflated to proper PSI). If the wheel is flat or damaged, then it may be broken and require replacement. Refer to your make, model and diagram to ensure this is the correct part for you.

This is the return hose assembly, or return line, which is designed for various models of airless paint sprayers and is sold as an individual part. The return line is designed to allow paint and pressure to be returned into the reservoir, and simultaneously connected to a specific port on the sprayer for a continuous paint cycle. This ret...Read moreurn line is comprised of a high-quality rubber and metal pump attachment at one end and a metal tube and plastic reservoir attachment at the other end. Depending on your model, you may need a set of pliers or a wrench to disconnect and remove the old line. Before you replace your old line, it is recommended that you wrap the metal end of the line with Teflon tape to create the best seal possible. When replacing the line, disconnect the sprayer from power and release any pressure in the spray gun by squeezing it until no more pressure is felt.

This authentic blue OEM motor shield in your paint sprayer protects the motor from dust, dirt, water, and debris. It ensures optimal motor temperature by aiding in heat dissipation. The shield is located on the top or side of the sprayer. A broken shield may have cracks, breaks, or missing sections, and may wobble when touched. Not replac...Read moreing the shield can result in motor damage, overheating, and an increased risk of electrical shock. When removing your existing shield, remove its fasteners with a screwdriver or a pair of pliers. Detach the shield from your machine by wiggling it to release it. The motor shield and the motor itself are sold separately.

The packing o-ring fits between the displacement pump and the intake tube. This item is made of rubber and is available individually. This is a genuine Graco replacement part for use in sprayers. A set of pliers may be required to replace this part if it becomes broken.