1766 (Type 1) Black and Decker Bench Grinder - Overview

This is a genuine replacement part sourced from the original manufacturer for use with grinders made by Black & Decker and DeWALT. The wheel nut goes between the wheel collar and the guard cover. When replacing this item a screwdriver and a wrench set may be needed. This part may become stripped or broken and will need to be replaced. It is made of metal and is sold individually.

This part has been sourced from the original manufacturer to ensure quality. The flat plate is intended to be used with bench top grinders from DeWalt and Black & Decker. The plate is used to disperse pressure put on the underside of the eyeshield by the bolt that secures the eyeshield. This item is sold individually, please note two flat plates may be needed.

This is a manufacturer sourced replacement part designed for use with bench grinders. It is used to secure the bracket, eye shield and a plate. This part is made out of metal and it is sold individually. Requires a screwdriver to tighten/loosen this screw.

This is a genuine replacement bracket assembly. It is supplied directly from original equipment manufacturer for use with bench grinders. This bracket helps to secure the eyeshield to the main unit. It is made out of metal and it is sold individually. Please note the hardware and the eyeshield are both sold separately. To complete this r...Read moreepair you would need a screwdriver and a wrench. • Make sure the unit is unplugged • Remove the screws that secure the eyeshild • Remove the nut and the carriage bolt • Replace old bracket with a new one • Reassemble in reverse order

This item has been OEM sourced to ensure a high level of quality. The metal bracket is intended to be used with bench top grinders. The item attaches to the motor cover assembly. The bracket is used to mount the right side wheel guard. This item is sold as an individual replacement part.

This item has been sourced from the original manufacturer and is intended to be used with bench top grinders from Black & Decker and DeWalt. The metal bracket attaches to the top of the left wheel guard and is used to mount the left side eye shield. The bracket can be purchased as a single item, please note the hardware and eye shield are separate items.

The bracket attaches to the washer and the knob and is made of metal. It is an authentic OEM sourced item which is specially produced for use with bench grinders made by DeWALT and Black & Decker. Keep in mind this high-quality part is sold individually. A screwdriver may be helpful when replacing this item. This part may become broken and will need to be replaced.

This is an authentic Black and Decker replacement part, sourced from the original manufacturer for use with bench top grinders. The special washer is commonly used to provide spacing between the knob and the left side bracket. This washer is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic DeWalt replacement part, sourced from the original manufacturer for use with bench top grinders. The metal hex head bolt is used to secure the eye shield plate to the guard bracket. This item is available as an individual replacement part. A wrench set may be needed to install this item.

This is a Genuine OEM replacement part used on Bench Grinders. It helps to protect user and the users eyes from the debris while the Grinder is in use. This part is made out of Clear Plastic with a Metal Bracket. To replace this Eyeshield you would need a Screwdriver to secure it to the unit.