1720H Simplicity Lawn Mower - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

It is an OEM item which is made for use with Murray, Snapper, and Simplicity lawn mowers. This gasket provides a tight seal for the arbor housing. Over time the material will wear out and it may get compressed eventually requiring a replacement to ensure the unit functions properly. Refer to the specific diagrams of your model for the exa...Read morect location and the correct installation of the new part. It is a high-quality gasket which is made of a durable foam material and is sold as an individual component. You will need a wrench set to take apart the housing and gain access when replacing this gasket.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn mowers. This is an identical replacement for a missing or damaged housing-arbor top that was originally installed on a new unit, please make sure to check the appropriate diagrams and the owners manual f...Read moreor the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.

This replacement hex washer is an authentic component which is supplied directly from the original equipment manufacturer, it is specially designed for use with Snapper and Simplicity lawn mowers. It helps to distribute the pressure evenly between connected pieces, please refer to the appropriate diagrams of your model for the correct loc...Read moreation and use of this hardware. This high-quality part is made of durable metal material and is sold individually.

This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to be replaced if it becomes broken. A screwdriver, a set of pliers, and a wrench set may all be needed to help replace this part. This item is sold individually.

Sourced directly from the original equipment manufacturer, this Spring Washer is used to spread the load under a bolt or nut. It has an I.D. of 0.475 inches, is made of metal, and is sold individually, not as part of a kit or assembly. If you notice any signs of corrosion, cupping, wear, or damage, you will need to replace the Spring Wa...Read moresher. Refer to your owner's manual to determine the exact location of this part on your model.

This genuine item is supplied by the original equipment manufacturer for use with Murray, Simplicity and Snapper lawn mowers. It is the special retaining ring for the wheel. If the hardware is missing or is damaged, this will provide an identical replacement for the original part that was installed on a new unit. One durable metal retaini...Read moreng ring is included. Make sure to check the appropriate diagrams for your model to ensure the correct repair procedure.

It is a genuine part that is supplied directly from original equipment manufacturer for use with Simplicity and Snapper lawn mowers. This replacement washer helps to provide a tight seal between connected parts, please make sure to check appropriate diagrams for correct location and use of this hardware. Keep in mind this high-quality washer is made of durable metal and is sold individually.

The hub cap goes next to the ring and the washer. It is a genuine OEM sourced part which is specially designed for use with lawn mowers and lawn tractors made by Murray, Snapper, and Simplicity. This item is available individually. A set of pliers might be necessary during the installation of this part. It is made out of rubber and will need to be replaced if it breaks.

An authentic item that is supplied by the original manufacturer for use with Snapper, Murray and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hood strap that was originally installed on a new unit, please make sure to chuck the appropriate diagrams of your model for the correct location and...Read more application of this component. Keep in mind this high-quality item is made of durable black rubber material and is sold individually.

This part is made of metal and is available as an individual replacement. The blade adapter fits between the washer shim and the retaining ring. An allen wrench may be required to replace this item if it becomes broken. This item is an original part from Snapper, Murray, and Simplicity for use in mower tractors.