1710 (Type 4) Black and Decker Miter Saw - Overview

Genuine Dewalt replacement part, this item is sold individually. It is used on all the tools shown below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced ...Read morepower tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Genuine Dewalt replacement part, this item is sold individually. The purpose of the 394589-01 Screw is used to secure the pivot plate on the Miter Saws listed below. You can use a flat blade screwdriver or a Torx T-30 bit on this screw.

This is an Original Manufacturer Approved replacement part used on some Compound Miter Saws. This part is made out of Metal and it is Sold Individually. The purpose of this Clamp is to help securing a Blade to the unit.

This item is a genuine DeWalt part that has been sourced from the original manufacturer. The retainer plate is intended to be used with miter saws. This item is part of the guard assembly and is used as a nut that secures the pivot plate. The retainer plate is priced as a single item.

This is a genuine Dewalt replacement part, it is sold individually. The purpose of this bolt is to secure the blade on the miter saw models shown below. It has a 1/2 " hex head. It is 1 inch long, with left hand threads.

This is a genuine manufacturer approved replacement flanged sleeve used on Black and Decker and Dewalt miter saws. It is sourced directly from original equipment manufacturer and it is sold individually. This item is secured to the link arm allowing it to move freely. Replacing this sleeve you will need a screwdriver to remove the screw that secures it to the link arm.

It is a genuine replacement screw that is sourced directly from original equipment manufacturer. This is a standard hardware that has multiple uses depending your tool. For correct location and use of this screw, please check appropriate diagrams. This torx screw is sold individually.