16RH Shop-Vac Utility Vacuum - Overview

It is a genuine item that is supplied by the original equipment manufacturer for use with Shop-Vac vacuums. The retainer is designed to secure the cartridge filter in the housing. It provides an identical replacement for a missing or a damaged part that was installed on a new equipment. Please check the owner's manual and the diagrams for...Read more your model to ensure the correct application of this component. Keep in mind this high-quality filter retainer is made of durable plastic and is sold as an individual item.

This is a genuine Shop-Vac replacement part that has been sourced from the original manufacturer to be used with wet/dry vacuums. The casters connect the bottom of the vacuum's base in the castor's feet. These items are used to provide traction for the vacuum. These castors are sold in a pack of four.

This genuine manufacturer sourced replacement part is designed for use with Shop-Vac vacuums. This caster wheel helps you keep your unit mobile for easy transportation. This caster consists of a metal shaft/bracket and a plastic wheel. This caster is sold individually.

The power unit goes between the lid cage & latch and the inner motor cover. This is available as an individual replacement part and is made out of durable materials. It is a genuine Shop-Vac replacement part used in compatible vacuums. If this item becomes broken it will need to be replaced and may require a screwdriver during the installation.

This is a genuine manufacturer approved replacement cartridge filter. It is specially designed for use with Shop-Vac vacuums. Its purpose is to filter out dust and debris from contaminating the unit. This filter is H12 filtration class and retains 99.97% of particles down to 0.3 micron. It is made out of paper with plastic and it is sold ...Read moreindividually. Please note, the foam filter is sold separately. Replacing this filter is easy and it does not require any tools. • With the tank cover in an upside down position, slide the cartridge filter down over the lid cage • Push until the filter seals against the cover • Place filter retainer into the top of the cartridge filter • Hold the tank cover with one hand and turn the handle on the filter retainer clockwise to tighten