16CG5AMQ006 (2011) MTD Lawn Mower - Overview

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locatio...Read morens. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.

The fuel tank nipple, also referred to as a fitting, connects the fuel tank of your lawn equipment to its engine fuel line, allowing fuel to reach the engine. If you observe fuel leaks or a loose connection, the nipple may be damaged and requires replacement. When removing the old fuel tank nipple, ensure the tank is empty and the engine ...Read moreis turned off. Use a wrench or pliers to detach the nipple. This high-quality OEM replacement part is sold individually.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This authentic OEM air filter assembly includes a pleated paper air filter and a foam pre-filter. It is located in the air cleaner housing of your lawn equipment. Its purpose is to filter out dust and debris, ensuring that the engine receives clean air for efficient fuel combustion. If your filter is clogged or torn, it is necessary to re...Read moreplace it. A clogged or damaged filter can cause difficulties when starting your machine. It can also lead to increased fuel consumption, costly repairs, and potential engine failure. To replace the filter, locate the air cleaner housing, remove the cover by pressing the push tab and lifting it up, then take off the air filter from its base. This assembly is sold individually.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

A breather hose is used within the ventilation system for a crankcase, or engine, to connect the crankcase to the air manifold and allow hot air to escape. This genuine OEM breather hose is made of a high-quality rubber and is designed for use and compatible with several different makes and types of outdoor power equipment, such as lawnmo...Read morewers, tillers, engines, log splitters, and snowblowers. Due to the build material of this hose, it can break down over time and through exposure to gas, oil and excessive heat. If you notice any damage on the hose, fuel leaks or worsened engine performance resulting in rough idling or stalling, this hose may be damaged or simply need replacing. To replace this hose, locate the hose on your model and remove any clamps, before pulling off the old hose and installing the new, with any necessary hardware such as clamps.

An oil drain plug is used to provide a convenient, controlled and easier way to drain the oil from the engine and is typically located at the bottom of the machine, screwed into the oil sump/pan. This oil drain plug is compatible with various makes and models of lawn equipment and is made of high-quality metal measuring approximately 1-in...Read morech in length and is sold as an individual part. If you notice oil leaking from your machine, or worse performance from your machine, this drain plug could be missing or damaged. To replace this drain plug, simply unscrew the old drain plug and screw this one in its spot, making sure to tighten it to the manufacturer standard.

This is a genuine OEM replacement part that is intended to be used with tillers from Troy-Bilt, Yard Machines, MTD, and Cub Cadet. The plastic air cleaning housing attaches to the carburetor\\\'s air intake. This item is used to transfer air from the filter to the carburetor. This air cleaner housing is sold as an individual replacement part.

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part dia...Read moregram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

This item is priced as an individual replacement part. The wheel is made out of plastic. A wrench may be helpful when replacing this item. It may become broken and will need to be replaced. This is an OEM part directly sourced from the manufacturer for use in lawn mowers made by MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man.