169679 - Overview

This authentic OEM sourced replacement wheel is specially designed for use with Snapper, Simplicity and Murray lawn mowers and tractors. It is the wheel for the mower deck, it will help to support its weight and assist in turning. This wheel is made out plastic material and it is sold individually. Replacing this deck wheel is a simple task that should only require a set of wrenches.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

Sourced directly from the original equipment manufacturer, this Spring Washer is used to spread the load under a bolt or nut. It has an I.D. of 0.475 inches, is made of metal, and is sold individually, not as part of a kit or assembly. If you notice any signs of corrosion, cupping, wear, or damage, you will need to replace the Spring Wa...Read moresher. Refer to your owner's manual to determine the exact location of this part on your model.

Support the front section of a compatible mower deck with this metal rail rod. It helps hold the deck in position while the mower is in use. Replace the rod if it is bent, broken, missing, or no longer connects securely. Stop the engine, remove the key, and let the machine cool before repair. Check the exact mower and deck model numbers before ordering.

This is a genuine manufacturer-approved component which is designed for Murray, Snapper, and Simplicity riding lawn mowers and garden tractors. It is an identical replacement for a missing or a damaged pulley idler that was installed on a new unit. The part is an important component that helps to apply tension on the belt. Refer to the ap...Read morepropriate diagrams for your model to ensure the correct repair procedure. Note, this high-quality pulley idler is made of a durable metal and is sold individually. A wrench set will be needed to perform this repair.

This is an original replacement part manufactured for use with lawnmowers. The special deflector kit is used to direct the grass clippings out of the side discharge chute. This deflector kit includes the plastic deflector shield and the hardware used to mount the deflector. The deflector kit is sold as an individual replacement part.

This genuine OEM replacement part is sourced directly from original manufacturer for use with lawn mower and garden tractors. This bolt helps to secure the deck wheel which supports mower deck and allows it to move freely. This hex head bolt is sold individually and would require a wrench for installation.

This is an authentic part produced by original manufacturer. It is used in various tractors and lawn mowers built by Murray, Snapper, and Simplicity. Ball bearings mainly serve to hold and buffer moving parts, reducing friction. They also assist in keeping parts moving in the correct position. Therefore, they are high wear items with regular replacement needs. Sold individually.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is a genuine replacement part manufactured for use with lawnmowers. Self-locking rings are designed to fix to a shaft without a groove to sit in. The ring can be pushed on, and is used in a variety of capacities. The self-locking ring is sold individually, please see model diagram for part location and use.