1696626-00 Snapper Lawn Mower - Overview

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Pulley 3 od

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

This U-type locking speed nut is used in your lawn equipment to secure components. It grips onto a threaded bolt or stud, to fasten components together without needing extra tools like a wrench. This speed nut is a grade 5 replacement part with a 5/16-inch diameter and 18 threads per inch. It is also commonly used for panels, covers, brac...Read morekets, and more, such as the engine frame or muffler cover. If the speed nut fails to hold things securely and they become loose or wobbly, it may be broken or worn out. Additionally, your machine may experience excessive vibrations or rattling. This can lead to potential damage, like cracks or harm to nearby components. The location of the speed nuts in your machine will vary depending on its make and model. Consult your user manual to find the specific instructions on how to access them. It may involve removing certain components or covers. To remove the speed nut, start by unthreading the screw or bolt that is holding it in place. Once the fastener is removed, you can pry the speed nut off your machine. Keep in mind that speed nuts are sold individually, so it is a good idea to check how many you will need. It is recommended to replace all the speed nuts at once since they tend to wear out at a similar rate.

Zerk fitting 1/4

This is an authentic Simplicity replacement part. The idler pulley is designed by the manufacturer for use in lawn mowers and snow throwers. This part is made of metal, and is used to adjust tension on the V-belt. You will require a wrench when replacing this part. This item is sold individually.

This is an authentic Murray replacement part, sourced from the original manufacturer for use with lawn and garden equipment. The special hex head bolt is used with a variety of types of equipment and its application can vary based on the model. This bolt is available as an individual replacement part.

Bearing retainer plate