169642 - Overview

Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A Shear Pin will break when you hit a large chunk or ice or other debris...Read more. Once it is broken, it will need to be replaced. You will need pliers to complete this repair. Customers rate this repair as Easy.

This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

Restore snow clearing performance on a compatible single stage snow blower with this scraper bar and auger paddle kit, the scraper bar protects the bottom edge of the auger housing and helps collect snow, the paddles gather snow and move it toward the discharge chute, replace these parts when they are cracked or badly worn, stop the engine and remove the key before repair, confirm fit with the exact model number.

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

It is an OEM item which is made for use with Murray, Snapper, and Simplicity lawn mowers. This gasket provides a tight seal for the arbor housing. Over time the material will wear out and it may get compressed eventually requiring a replacement to ensure the unit functions properly. Refer to the specific diagrams of your model for the exa...Read morect location and the correct installation of the new part. It is a high-quality gasket which is made of a durable foam material and is sold as an individual component. You will need a wrench set to take apart the housing and gain access when replacing this gasket.

This is a genuine OEM supplied replacement drive belt, it is specially manufactured for use with Murray, Snapper and Simplicity snowblowers. This is the belt that helps to drive the augers. Over time belts tend to wear out and stretch eventually needing a replacement to ensure optimum performance. It is made from durable, high quality rubber and it is sold individually.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This replacement screw is generally used to secure the muffler guard, for correct application make sure to check appropriate diagrams of your model. It is a high-quality Torx screw which is sold individually.

This is an OEM part for a variety of machines. The purpose of this Flange or Lock Nut is to hold parts in place while resisting loosening. It is made of metal, is not part of a kit or assembly, is sold individually, and is gold in color. This part will need to be replaced when the threads are stripped or if it has become worn or damaged...Read more. You will need a wrench or socket set and a torque wrench to complete this repair. Torque the nut to the manufacturer recomendations. Customers rated this repair as Easy.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.