1696213 Simplicity Lawn Mower - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

Keep in mind that this high-quality part is sold individually. The flat idler attaches to the spot idler arm and helps to drive the belt. It will need to be replaced if it becomes broken or stretched. A socket set and a wrench set may be needed when replacing this part. This part is an original part from Murray, Snapper, and Simplicity fo...Read morer use in rear engine rider mowers, rotary mowers, drive tractors, yard cruisers, and lawn tractors.

It is a genuine OEM sourced component which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty washer that is utilized to provide a tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the correct location and applica...Read moretion of this hardware. Keep in mind this high-quality washer is made of durable metal and is sold individually.

This is an authentic manufacturer sourced replacement v-belt which is specially designed for use with Murray, Snapper, and Simplicity lawn mowers. It is the main deck belt that is used to drive the blades, unfortunately, over time belts tend to wear out and stretch eventually requiring a replacement to maintain peak performance. Clean the...Read more pulleys before installing the new belt to ensure top performance and longevity with your new belt. Keep in mind this high-quality part is made of durable rubber and is sold individually.

This is an authentic Murray replacement part sourced directly from the manufacturer. The spacer is commonly found in lawn mowers from Murray, Snapper, and Simplicity. This is a metal part that is generally used to hold two parts slightly apart from each other. It is found in different locations in the machine, depending on model. Plea...Read morese refer to the parts diagram for your model to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this item. This part is sold individually.

Capscrew,3/8-16x2.25

This is an authentic replacement part, sourced from the original manufacturer for use with riding lawnmowers. The metal arm is used to mount the mower deck's idler pulley and to link it to the spring. This arm is available as an individual replacement part, please see illustrated part list for associative parts.

Bolt 3/8-16 x 1-3/4