1695895 Simplicity Lawn Mower - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

Sourced directly from the original equipment manufacturer, this Spring Washer is used to spread the load under a bolt or nut. It has an I.D. of 0.475 inches, is made of metal, and is sold individually, not as part of a kit or assembly. If you notice any signs of corrosion, cupping, wear, or damage, you will need to replace the Spring Wa...Read moresher. Refer to your owner's manual to determine the exact location of this part on your model.

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with riding lawnmowers. The coated steel blade is used as the grass cutting implement inside the mower deck. The blade is secured with a round arbor, and will likely use a blade adapter, please see model diagram for additional parts. The blade is sold individually.

This is an original part from Simplicity and Snapper for use with Lawn Tractors. The pulley spins the blade on the mower deck of the tractor. The most common reason for replacing the pulley is when it is stripped, causing the belt to snap and the blades not to move. This part is sold individually. The tools that you will need to replace the puller is a 7/8 inch socket and an impact driver.

This is a genuine replacement part sourced from the original manufacturer for use with riding lawnmowers. The pulley is commonly used to drive the arbor assembly as the deck belt rotates the pulley. This deep groove pulley is available as an individual replacement part, please see illustrated part diagram for associative parts.