Models > 1695875

1695875 Simplicity Snow Blower - Overview

Sections of the 1695875

[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Knob, 5/16-18 Wing (Black) – Part Number: 703065
Knob, 5/16-18 Wing (Black)
PartSelect #: PS9999469
Manufacturer #: 703065
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down th...
  In Stock
Kit, Scaper Bar & Flight – Part Number: 1687806
Kit, Scaper Bar & Flight
PartSelect #: PS10069504
Manufacturer #: 1687806
  In Stock
Bearing, Ball – Part Number: 1705897SM
Bearing, Ball
PartSelect #: PS8887153
Manufacturer #: 1705897SM
This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for...
  In Stock
Belt, Drive – Part Number: 1739338YP
Belt, Drive
PartSelect #: PS8894608
Manufacturer #: 1739338YP
  In Stock
Screw, Hex Washer Head, Muffler Guard – Part Number: 699854
Screw, Hex Washer Head, Muffler Guard
PartSelect #: PS9295215
Manufacturer #: 699854
  In Stock
Capscrew, Hex Washer Head Taptite, #10C X 5/8 Gr5 Bz – Part Number: 703062
Capscrew, Hex Washer Head Taptite, #10C X 5/8 Gr5 Bz
PartSelect #: PS9999467
Manufacturer #: 703062
  In Stock
Nut.25-20 Hex Nylock – Part Number: 703232
Nut.25-20 Hex Nylock
PartSelect #: PS9999570
Manufacturer #: 703232
This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless ...
  In Stock
Handle, Chute Rotation – Part Number: 1739692YP
Handle, Chute Rotation
PartSelect #: PS9905603
Manufacturer #: 1739692YP
  In Stock
Support, Scraper Blade – Part Number: 1752660AYP
Support, Scraper Blade
PartSelect #: PS8897626
Manufacturer #: 1752660AYP
  In Stock
Bolt, 5/16-18 X 2 – Part Number: 703059
Bolt, 5/16-18 X 2
PartSelect #: PS9999462
Manufacturer #: 703059
  In Stock
Spring – Part Number: 1752450YP
PartSelect #: PS8900486
Manufacturer #: 1752450YP
  In Stock
Retaining Ring – Part Number: 703976
Retaining Ring
PartSelect #: PS11829825
Manufacturer #: 703976
  In Stock

Questions And Answers for 1695875

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scraper bar and flight worn past wear limit.
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and applied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Parts Used:
Kit, Scaper Bar & Flight
  • Duane from RICHFIELD, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Initially, belt came off, lodged between pulley and housing. When replace, belt broke
NOTES: 1) This is not a new model, but a rebranded version - previously under Murray, Simpliticy, Snapper, etc., so parts are available, but not readily identified yet.
2) This repair may be quite simple or it may be a huge problem, depending on whether the manufacturing problem described below is present.
3) The space between the housing and aluminum pulley is so tight that a belt CANNOT be fit through it!
Therefore, the only way to replace the belt is to remove the pulley.
* * * * * * * * * * * * * * * * * *
Step 1. As with every other single stage snow blower, remove the belt cover held by six 10 mm bolts. This may require a metric nutdriver or a deep socket for a couple of bolts.
Step 2. Use a 17 mm wrench to remove the large nut holding the aluminum impeller pulley, along with the flat and split lock washers. Also remove the part that locks the pulley onto the shaft.
Step 3a. If there is not a manufacturing issue, the pulley will come off easily and you may proceed to thread the new belt around the power and idler pulleys.
Step 3b. IF THE PULLEY DOES NOT COME OFF, you may need to get a wheeler puller tool to get it loose and off the shaft. Once the overly tight pulley is off, you may wish to file down the shaft near the end until the pulley slides on and off without much effort. (You may also wish to apply a dry silicone lubricant to the shaft to make the job easier next time.)
Step 4. In order the install the new belt, feed it around the power pulley and the idler pulley controlled by the "engage" handle. With the impeller pulley still off its shaft, feed the belt around it, fitting the belt grooves into the pulley grooves.
Step 5. The large aluminum can be replaced on its shaft, followed by the pulley lock, flat washer and split ring washer. Tighten the pulley lock nut, holding the impeller blades to keep the shaft from turning.
Step 6. Replace the belt cover and the six bolts holding it in place.
Parts Used:
Belt, Drive
  • julianne from CEDAR RAPIDS, IA
  • Difficulty Level:
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable)
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!