1695759 Simplicity Lawn Tractor Accessories - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

Pulley 3 od

This U-type locking speed nut is used in your lawn equipment to secure components. It grips onto a threaded bolt or stud, to fasten components together without needing extra tools like a wrench. This speed nut is a grade 5 replacement part with a 5/16-inch diameter and 18 threads per inch. It is also commonly used for panels, covers, brac...Read morekets, and more, such as the engine frame or muffler cover. If the speed nut fails to hold things securely and they become loose or wobbly, it may be broken or worn out. Additionally, your machine may experience excessive vibrations or rattling. This can lead to potential damage, like cracks or harm to nearby components. The location of the speed nuts in your machine will vary depending on its make and model. Consult your user manual to find the specific instructions on how to access them. It may involve removing certain components or covers. To remove the speed nut, start by unthreading the screw or bolt that is holding it in place. Once the fastener is removed, you can pry the speed nut off your machine. Keep in mind that speed nuts are sold individually, so it is a good idea to check how many you will need. It is recommended to replace all the speed nuts at once since they tend to wear out at a similar rate.

Lockwasher split 3/8

Auger Belt

This is an authentic Murray replacement part, sourced from the original manufacturer for use with lawn and garden equipment. The special hex head bolt is used with a variety of types of equipment and its application can vary based on the model. This bolt is available as an individual replacement part.

Bearing retainer plate