169563 Lawn Tractor Accessories - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

An authentic item that is supplied by the original manufacturer for use with Snapper, Murray and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hood strap that was originally installed on a new unit, please make sure to chuck the appropriate diagrams of your model for the correct location and...Read more application of this component. Keep in mind this high-quality item is made of durable black rubber material and is sold individually.

This Hair Pin is a metal, silver, individually sold pin measuring .0915 x 1-7/8. It is used to secure parts in place, or to prevent fasteners from backing out, and can be used in various locations on a variety of equipment. Installation is rated as "Easy" by users and doesn't require any special tools. If broken or damaged, it should be r...Read moreeplaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This 5/16-inch?18 wing nut secures a removable or adjustable part on select lawn and garden equipment. Its winged shape allows it to be tightened and removed by hand. Use the full equipment model number to guarantee the proper fit and location. Check the stud and washer for damaged threads or wear before installation. Start the nut by hand and tighten it firmly, but do not use pliers or overtighten it.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nuts location and usage.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

This clear tube, also known as an upper chute attachment, is designed for use within a twin catcher, or grass collection system. This tube is part of the chute assembly and is used to make it easier for the clippings to transfer between the cutting deck on your lawn mower to the collection bags. This chute is compatible with various model...Read mores of lawn mower, both ride-on and push mower. This tube is made of clear plastic and comes as an individual part, without any of the securing connectors or hardware. To replace this tube, you will need a screwdriver or wrench to unscrew and disconnect any connectors, before you can twist the old tube out and replace it with the new one.

This is an OEM part sourced directly from the manufacturer. The screw is commonly found in snowblowers and snowthrowers from Craftsman. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to...Read more be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is available as an individual replacement part.

Knob-int thr .312-18