1695171 Snapper Lawn Tractor Accessories - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

An authentic item that is supplied by the original manufacturer for use with Snapper, Murray and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hood strap that was originally installed on a new unit, please make sure to chuck the appropriate diagrams of your model for the correct location and...Read more application of this component. Keep in mind this high-quality item is made of durable black rubber material and is sold individually.

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

This high quality OEM supplied replacement part is used on Murray lawn mowers. It is generally used to secure the mulch cover. This part durable metal windnut is sold individually, please note the bolt and washer to helps securing the cover are all sold separately.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

This clear tube, also known as an upper chute attachment, is designed for use within a twin catcher, or grass collection system. This tube is part of the chute assembly and is used to make it easier for the clippings to transfer between the cutting deck on your lawn mower to the collection bags. This chute is compatible with various model...Read mores of lawn mower, both ride-on and push mower. This tube is made of clear plastic and comes as an individual part, without any of the securing connectors or hardware. To replace this tube, you will need a screwdriver or wrench to unscrew and disconnect any connectors, before you can twist the old tube out and replace it with the new one.

Screw hex 1/4-20x.5

The bolt attaches to the pulley bearing. It is made of metal and is available individually. This part is an OEM from Snapper and Simplicity for use in lawn tractors and snowblowers. When replacing this item a wrench will be required during the installation process. It will require replacing if it becomes stripped or broken.