169456 Simplicity - Overview

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Key-ignition indak

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

This is a genuine replacement part sourced directly from the manufacturer. The fuel hose assembly is commonly found in lawn mowers from Snapper and Simplicity. This part includes a flexible plastic tube with metal connector nozzles, and it is used to carry fuel from the fuel tank to the fuel pump. This item is sold as an individual replacement part.

It is a genuine manufacturer-sourced component which is specially made for use with Murray, Snapper and Simplicity riding lawn mowers and garden tractors. It is the part of the equipment that allows a user to engage and disengage the blades. Unfortunately, over time components will wear out and may begin to fail eventually requiring a rep...Read morelacement. Keep in mind this high-quality plastic body switch is sold individually. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this part.

This is a genuine item that is supplied by the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or faulty bearing brongze flang that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this hardware. This high-quality component is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is an authentic replacement part manufactured for use with rear engine mowers and lawn tractors from Craftsman. The user will need to replace this hex nut if it is missing or not working correctly. This hex nut screws onto the transmission link lever. This part is made of durable material and sold individually.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or a faulty vented cap that is specially designed to keep the fuel in the tank, please make sure to refer to the appropriate diagrams ...Read moreof your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable plastic and is sold individually.

It is a genuine OEM sourced part that is specially produced for use with Murray and Snapper lawn and garden equipment. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. This high-quality carriage ...Read morebolt is made of durable metal and is sold individually, keep in mind the washer and other parts are all sold separately.