169449 - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

Designed for use in Snapper and Simplicity ride-on mowers, this Roller is sourced directly from the manufacturer, is made of durable black plastic, is 4 inches long, and sold individually. The Roller helps allow the deck to move over the lawn without gouging into the ground. When the Roller has broken, you will notice the deck starts to...Read more ground out. This part will wear over time and needs to be replaced if it is damaged or fatigued. Customers rate the difficulty of this repair as Medium.

Introducing the Simplicity Arbor Bottom Housing Assembly, a premium quality component that successfully enhances the functionality of your lawn tractor. This particularly designed Mandrel Housing is adept at securely housing the shaft that delivers an effective spin to the cutting blade. Durably constructed and complete with a lube fittin...Read moreg, the housing ensures smooth operation and prolonged part life. It's recommended to don work gloves to ensure protection while installing this prime part. Upgrade your mower's performance effortlessly with this Bottom Arbor Housing from Simplicity, a name synonymous with quality and performance. Maximize your lawn care experience by opting for Simplicity's Arbor Bottom Housing Assembly today.

It is an OEM item which is made for use with Murray, Snapper, and Simplicity lawn mowers. This gasket provides a tight seal for the arbor housing. Over time the material will wear out and it may get compressed eventually requiring a replacement to ensure the unit functions properly. Refer to the specific diagrams of your model for the exa...Read morect location and the correct installation of the new part. It is a high-quality gasket which is made of a durable foam material and is sold as an individual component. You will need a wrench set to take apart the housing and gain access when replacing this gasket.

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

This authentic manufacturer-supplied rounded roller is specially made for use with Snapper and Simplicity riding lawn mowers and garden tractors. It is a special component which helps to support the deck. This is an identical replacement for a missing or a damaged part that was installed on a new unit. Refer to the appropriate diagrams fo...Read morer your model to ensure the proper repair procedure. One durable component is included. Keep in mind the hardware to secure it is sold separately.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer. If you are unable to start and stop your engine, you may need to replace the Ignition Switch Assembly. To complete this repair, you will need a screwdriver, a wrench set, and pliers. Customers rate this repair as Easy.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn mowers. It is an identical replacement for a missing or damaged retainer that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location a...Read morend application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.