1694382 Simplicity Snow Blower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

This is an OEM part for a variety of machines. The purpose of this Flange or Lock Nut is to hold parts in place while resisting loosening. It is made of metal, is not part of a kit or assembly, is sold individually, and is gold in color. This part will need to be replaced when the threads are stripped or if it has become worn or damaged...Read more. You will need a wrench or socket set and a torque wrench to complete this repair. Torque the nut to the manufacturer recomendations. Customers rated this repair as Easy.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

(s) handle lower

Key-ignition indak

This is a genuine manufacturer-approved replacement part which is specially designed for Snapper and Simplicity lawn and garden equipment. Bushings are generally utilized to provide a tight fit between connected components while allowing for movement with minimum friction. If the bushing is damaged or is missing, this will provide an iden...Read moretical replacement for the original hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. Note, one durable metal bushing is included.

Snow blower auger paddle kit. Includes all six paddles and replacement bolts.

This nylon pulley is an OEM direct from the Snapper manufacturer. Compatible with many lawn mowers, the pulley is fastened to the rope pulley bracket and the flange bushing. This item helps the belt to support the changing direction of the engine's force. The nylon pulley is sold individually. A screwdriver and pair of pliers are needed for the installation.