1694148 Simplicity Lawn Tractor Accessories - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This red nylon button fits onto a 1/4-inch control rod on select lawn and garden machines. It gives the operator a safer, easier place to push or pull the rod. The button is about 1.75 inches long. Replace it if it is cracked, loose, worn, or missing. Use the complete equipment model and serial number to guarantee the proper fit. Check th...Read moree parts diagram for its exact location because the rod may control a deck lift, linkage, or another adjustment. Turn off the machine before installation.

This U-type locking speed nut is used in your lawn equipment to secure components. It grips onto a threaded bolt or stud, to fasten components together without needing extra tools like a wrench. This speed nut is a grade 5 replacement part with a 5/16-inch diameter and 18 threads per inch. It is also commonly used for panels, covers, brac...Read morekets, and more, such as the engine frame or muffler cover. If the speed nut fails to hold things securely and they become loose or wobbly, it may be broken or worn out. Additionally, your machine may experience excessive vibrations or rattling. This can lead to potential damage, like cracks or harm to nearby components. The location of the speed nuts in your machine will vary depending on its make and model. Consult your user manual to find the specific instructions on how to access them. It may involve removing certain components or covers. To remove the speed nut, start by unthreading the screw or bolt that is holding it in place. Once the fastener is removed, you can pry the speed nut off your machine. Keep in mind that speed nuts are sold individually, so it is a good idea to check how many you will need. It is recommended to replace all the speed nuts at once since they tend to wear out at a similar rate.

Spring-comp 0.715odx

Bolt pushnut 1/4

Lock lift

Spring compression