1693977 Simplicity Leaf Blower / Vacuum - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic manufacturer-sourced replacement part, it is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. It helps to distribute the pressure and provide a tight seal between connected parts. This is a standard hardware which has multiple applications, please make sure to check the appropr...Read moreiate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality spacer is made of durable metal and is sold individually.

Bolt 5/16-18x1.25 g5

Washer nylon

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in snowthrowers and lawn tractors from Murray, Simplicity, and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in t...Read morehe machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this part. This item is available as an individual replacement part.