169222 Simplicity - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This is an OEM approved replacement cartridge commonly used on Briggs and Stratton engines. It is designed to filter out dust and dirt from entering engine. Includes one (1) pleated paper filter and one (1) foam pre-filter per order. Replacing this air filter element is easy and would only require a screwdriver. • Remove filter cover...Read more by taking out screws • Replace old filter with a new one • Reassemble in reverse order

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

Hammer-j .179thk 1.25

Capscrew 5/16-18x.625

Lockwasher split 3/8

Washer flat

Zerk fitting 1/4